Murphh90 Member 4 Member For: 13y 9m 26d Gender: Male Location: Mackay QLD Posted 11/09/12 10:21 AM Share Posted 11/09/12 10:21 AM Hey all, I have recently disconnected the stock heat exchanger from my fg xr6t and fit an oil - air cooler. So far all is well, and more to the point... no chance of a milkshake in my gearbox! I used the PWR Cooler, got some lines, and a set of fittings from ebay (tried cutting the stock exchanger pipes off but it was to dodgy for my liking) I dont have an auto trans temp gauge however took it to the drags the other weekend, and no problems after 5 consecutive runs. Noticed the oil was a discoloured when installed the cooler, so I am going to get a flush very shortly...The install itself wasnt too hard, had to relocate the horn, and extend the fog light wiring a little bit... no big deal! Im pleased with the result.Running stock power levels atm, also I have a 10 inch thermo fan that im am going to fit to the front of my oil cooler, when I can be bothered :headbang2:This is the PWR cooler I usedAnd the fittings I bought off ebay!Mounted the cooler under the DS headlightUsed a die grinder and made a few slits in the wheel arch to let the air flow through!Any questions feel free to ask! 1 Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m 21d Gender: Male Location: Sydney Posted 11/09/12 11:32 AM Share Posted 11/09/12 11:32 AM Nice one!I put mine somewhere a little different! 2 Link to comment Share on other sites More sharing options...
wilba Member 828 Member For: 16y 1m 30d Gender: Male Posted 11/09/12 11:45 AM Share Posted 11/09/12 11:45 AM Good stuff might attempt it next week . I thought about that second one but wasn't keen on drilling a hole in for 1 of the lines -_- Link to comment Share on other sites More sharing options...
Glouva1 Donating Members 654 Member For: 13y 5m 27d Gender: Male Location: Surrey Hills, Melbourne Posted 11/09/12 12:20 PM Share Posted 11/09/12 12:20 PM I put mine somewhere a little different! [/Trans looks brand new Matt. How is it? Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m 21d Gender: Male Location: Sydney Posted 11/09/12 12:38 PM Share Posted 11/09/12 12:38 PM I put mine somewhere a little different!http://I.imgur.com/8h0ws.jpg?1[/Trans looks brand new Matt.How is it?Yeah mate to coming along nicley!couple of little issues but all seem ok now!Just waiting one some rear driveline upgrades before I hit the track.What did you end up doing with your Drive Shafts? Link to comment Share on other sites More sharing options...
FG50T Member 568 Member For: 20y 10m 18d Gender: Male Location: Melbourne Posted 11/09/12 12:43 PM Share Posted 11/09/12 12:43 PM Have you added a fan to it Veva or is it ok like that? What brand cooler? Great spot.. Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 11m 1d Gender: Male Location: Sydney Posted 11/09/12 05:14 PM Share Posted 11/09/12 05:14 PM was wondering that toohaving air skim across it isnt nearly as effective as air actually being forced through it. Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 4m 15d Gender: Male Posted 11/09/12 09:48 PM Share Posted 11/09/12 09:48 PM Air passing over it would be enough to keep it cooler than the factory setup Link to comment Share on other sites More sharing options...
Glouva1 Donating Members 654 Member For: 13y 5m 27d Gender: Male Location: Surrey Hills, Melbourne Posted 11/09/12 09:52 PM Share Posted 11/09/12 09:52 PM What did you end up doing with your Drive Shafts? It's been delayed as Albin can't find a block big enoughto make driveshaft out of. Will be lucky to be back this year. Pointless going back to std temporarily IMO as will just break again at track but will be ok or street use. Might just wait for strong stuff me thinks. Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m 21d Gender: Male Location: Sydney Posted 11/09/12 10:33 PM Share Posted 11/09/12 10:33 PM (edited) Have you added a fan to it Veva or is it ok like that? What brand cooler? Great spot..No fan just a little scoop and some mesh!Logged temps and she never went over 165 F Edited 11/09/12 10:33 PM by Vevapower Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now