Jump to content

My Ba Xr6T Build And On-Going


CCCC

Recommended Posts

  • miso xr6
  • Donating Members
  • Member For: 15y 11m 20d

Hi Guys,

I thought I'd post up my build. Its a 2003 BA XR6 Turbo.

The Mods consist of :

- GTX 3582R Turbo

- ETM Manifold and 4" Dump Pipe

- 3.5" Exhaust System from Dump Pipe

- Turbo Smart 48mm External Wastegate

- Nizpro Big Big Intercooler

- Atomic Valve Springs

- Speed Flow Fittings and Braided Lines

- Plazmaman Intake and Intercooler Piping

- Plazmaman Surge Tank with AeroMotive A1000 Fuel Pump

- Walbro Intank Fuel Pump

- Siemens Deka 80lb Injectors

- Billet Fuel Rail and Turbo Smart Fuel Reg

- B&M Transmission Cooler

- Dominello Stregthened BTR 4 SPD Gearbox with 3000RPM Stall Converter

- Mickey Thomson ET Streets at the back.

- AutoMeter Cobalt Series Gauges, inc. Shift Light

- PLX OBD2 Gauge

I have made 358 RWKW on 17 PSI boost with 100 Octane fuel from United servo. I have also got a E85 tune not finished yet because of my old fuel system. But since I have put in the new fuel system I will be chasing 450 RWKW.

Cheers !

Miso

post-32902-0-39244900-1347353573_thumb.j

post-32902-0-77886600-1347353576_thumb.j

post-32902-0-61786300-1347353580_thumb.j

post-32902-0-85018700-1347353583_thumb.j

post-32902-0-58020900-1347353586_thumb.j

post-32902-0-31481700-1347353589_thumb.j

post-32902-0-08593500-1347353592_thumb.j

post-32902-0-17152100-1347353595_thumb.j

post-32902-0-83990800-1347353597_thumb.j

post-32902-0-67411000-1347353600_thumb.j

post-32902-0-25619500-1347353621_thumb.j

post-32902-0-66794200-1347353624_thumb.j

post-32902-0-79557000-1347353627_thumb.j

post-32902-0-71923300-1347353630_thumb.j

post-32902-0-53205000-1347353646_thumb.j

post-32902-0-47278500-1347353649_thumb.j

post-32902-0-34016600-1347353652_thumb.j

post-32902-0-11179100-1347353655_thumb.j

post-32902-0-26736900-1347354350_thumb.j

Edited by CCCC
Link to comment
Share on other sites

  • miso xr6
  • Donating Members
  • Member For: 15y 11m 20d

I also forgot to give a BIG Thanks to JOE at Crescent Motorsport for his Magic tune and for all his work and efforts put onto this car. Cant recommend him enough !

Link to comment
Share on other sites

  • miso xr6
  • Donating Members
  • Member For: 15y 11m 20d

Is this on standard rods?

Hi mate yea its all on standard rods, iv been pumping out 350 rwkw for a while now,an I give it a hard time all the time with no problems ever, the 450rwkw tune that im getting done next week on united e85 is just for one meet were all my buddys will be racing at the next test an tune event down here in sydney, there all in there little high powered rotaries so I want to give them a run lol, but other then that joe is building me a new forged motor, sould be done by late october.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'