Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 25d Gender: Male Location: Brisbane Posted 19/08/16 11:31 PM Author Share Posted 19/08/16 11:31 PM So I went out to Willowbank last night. Got 5 runs in. Managed a best of 12.665 at 127.7mph. I can't seem to get it off the line aggressively but that's all me not wanting to break something. Tailshaft Cv is gone after last night lol 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,042 Member For: 16y 8m 10d Gender: Male Location: Melbourne Posted 19/08/16 11:42 PM Share Posted 19/08/16 11:42 PM Yep, ~2.5 60' is definitely babying it haha. Good result, either way, a 12.6 is nothing to sneeze at. Link to comment Share on other sites More sharing options...
eff xr6t Member 569 Member For: 11y 2m 20d Posted 20/08/16 06:56 AM Share Posted 20/08/16 06:56 AM Was that on the same 24psi that it made 583kw? Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 25d Gender: Male Location: Brisbane Posted 20/08/16 02:02 PM Author Share Posted 20/08/16 02:02 PM That's the rdp tune that made 560kw on their dyno. I tried the fpt but I could feel it not pulling in 3rd n 4th like it should. Checked log abd cam timing showed up like it did on the dyno which we thought was due to valve slri ga not jeeping up with the agressive boost we put into it. Happy with it, will try again when new springs are fitted andtailshaft is sorted Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 25d Gender: Male Location: Brisbane Posted 22/09/16 09:34 AM Author Share Posted 22/09/16 09:34 AM (edited) After the drags I had a horrible noise and vibration coming from under the car. Turned out to be the center cv in the tail shaft was cactus. After stuffing around finding out what to replace it with it turns out that Malwood use bseries Pursuit/GT spline stubs as they're a bit bigger/stronger than the turbo stuff (still 28 spline). Got a new CV from Hardy Spicer for $350 :/ malwood wanted $495 Silly me didn't mark the shaft when I pulled it apart either and funneling my bank account towards other projects I didn't get it rebalanced, the result is a slight vibration over 120kph. Also finally got round to putting the gear shifter surround back on. Been racking my brains since doing the conversion for a simple way of doing it. Ended up (getting the brother in-law) cutting and welding it today to make it work. Turned out pretty good I didn't take a phot of the finished project as I was ina hurry to make sure it fitted but basically welded that rectangle 90 degrees to hot it was so that it would go on the tr6060 shifter mount. Edited 22/09/16 09:35 AM by Trent0 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 29,042 Member For: 16y 8m 10d Gender: Male Location: Melbourne Posted 22/09/16 09:41 AM Share Posted 22/09/16 09:41 AM Looks mint, Trent Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 26d Gender: Male Location: Probably above atmospheric pressure Posted 22/09/16 11:07 AM Share Posted 22/09/16 11:07 AM Trent Trent Trent! That's heeaps sick ayyy! 6 Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 25d Gender: Male Location: Brisbane Posted 23/09/16 08:44 AM Author Share Posted 23/09/16 08:44 AM Stick was still too high so I cut 20mm off it and now it sits more how it did factory. happy Link to comment Share on other sites More sharing options...
Trent0 The Toxic Rocket Donating Members 574 Member For: 14y 7m 25d Gender: Male Location: Brisbane Posted 14/10/16 01:23 AM Author Share Posted 14/10/16 01:23 AM I just got back from a 2 week trip down nowra way. The ute done about 2500km there and back, averaged 10.2L/100km (98) using fuel receipts and odo. Very happy. Link to comment Share on other sites More sharing options...
ROB83R Member 1,632 Member For: 8y 7m 1d Gender: Not Telling Location: Radioactive wasteland Posted 14/10/16 01:54 AM Share Posted 14/10/16 01:54 AM That's wicked economy for something pumping that kinda power out. Should've stopped in Dapto and laid some rubber on the freeway. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now