What Made You Feel Good Today

[bloodycrashboy]

  On 16/04/2020 at 7:02 AM, k31th said:

Just because BCB compared the number of deaths due to influenza as compared to COVID-19 doesn't mean he doesn't have empathy for those who get to the requirement of a ventilator to survive COVID-19.

Expand  

thank you keefy

at least you can see that I'm not a complete ass hat

[OZYWALKER]

Wow
You pelicans can jibber
That's a proper job there, lockdown has kicked in when forum gets going like that.

Weeeeeeeeeeeeeeeeee

[bloodycrashboy]

Excited here in Queensland   

lockdown has eased and got to get out for a ride today 
could only ride within a 50 klm radius of my home but that gave me a heap of places to go
did my old favorite up the Rex Range to Julatten.
I did go up and down the range twice cos very little traffic around
I think everyone went to the beach
didn't stop to take any pics but did the obligatory one when I got home

 

 

 

 

 

Also back to work on Tuesday

life is starting to get back to normal ....................................weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee 

[ken666]

Today I was given good news from two different sources!

Firstly I am possibly allowed to return to work once I get my special skills exemption from the government.

Which allows me to travel interstate without the need to self isolate for the standard 14 days.

 

And the other, but even better news came from my machinist at Pryce racing engines.

Letting me know that my custom order pistons from CP in the states have arrived.

So now the crank is machined, the rods have been modified to suit the oversized chromoly wrist pins that were made up for the new pistons, the block had been line honed with the stud kit and girdle fitted, the head is almost completed with 3 angle valve job and mild flow work and blueprinting of all volumes etc.

 

All that has to be done is to bore and deck the block and wrap it all up for me to bring home and begin assembly 😁😊😁

Yay

Can't wait to start this part, will post some pics as I go.

[gaz097]

So your in Newcastle area?

[ken666]

Yeah I've been getting Kevin @ Pryce racing engines to do my machining for close to 20 years.

Since Teterins stopped dealing with the public, he has gotten all the best of equipment and has the experience to get the best from it

[gaz097]

I had Kev machine my block and balance up the assembly.

Built a few of my mates engines as well

 

I could nearly hit his workshop with a rock from where I live

[Rab]

Hunting and gun/ammo sales open again

 

[ken666]

Kev has built plenty of Barra turbo motors and reckons the combination I'm putting together should be comfortable making 1200hp at the wheels with the right turbo.

I'm only planning to run it at 900-1000rwhp first up, but might get my hands on a bigger turbo and injectors down the track and see what it can produce.

I can't use the power, once it gets to this level due to the tyre size and manual box fitted...

But still!

I'd love the numbers just for bragging rights 😂

[Rab]

  On 12/05/2020 at 2:13 PM, Rab said:

Hunting and gun/ammo sales open again

 

Expand  

 

 

And indeed it is