The What's Pi$$Ing You Off Thread

[Rab]

And that one was just Dags saying "Screw you Rab - I'll do what I want with my gerbils"

[BenDoCo]

That's a BA/BF, right?

That's not alignment, that's worn lower control arm bushes.

Which means that you'll wipe out the new tyres rather quickly.

We need to get Wiggum, pull the pin and throw him in.

As they said above Phil....FG ----- front ----- both sides the same, almost. Steel on Drivers and canvas on pass.

Toyo's running 40psi and yes........low. Sits on ssl

I'm getting it looked at tomorrow - Thursday - so I will make sure he looks at the entire front end to see if something is wrong and I'll get it fixed straight away and then aligned.

Cheers heaps for the heads up.

Edited 21/01/15 12:15 PM by BenDoCo

[Ralph Wiggum]

That's a BA/BF, right?

That's not alignment, that's worn lower control arm bushes.

Which means that you'll wipe out the new tyres rather quickly.

We need to get Wiggum, pull the pin and throw him in.

Did I miss something here?

[Ralph Wiggum]

Bloke from across the road asking if i can blow in his breatho machine so his car will start because hes been drinking all day.

Na mate!!!!

Mouth full of mouthwash and blow in it so it Fuck his machine and the alco Fuck can't endanger anyone by trying to drive.

[.Stripes.]

For the last few weeks our HSE department have been going on about us needing to redo our inductions every 2 years. I decided to be proactive and ended up being the only one who's volunteered to get mine out the way. I rocked up to this thing this morning, literally 1 minute late, 2 mins tops and got told "nope, you'll have to come back next week. The GM closed the door and started his presentation." Whatever, not like I'm really that bothered about not doing it today. What makes it sh*t though is that my department manager came back from the managers meeting saying that the GM was a bit pissed about it and made a mention of it in the meeting. Sick, so forget the fact that I'm the only carnt who offered to do it voluntarily, and that no-one made mention that the GM starts a presentation at 7:30 on the dot, so be there early...so I'm getting roasted over 1 minute for something I've already done and only need a refresher...what a load of sh*t! f*ck em, they can chase me down from now on. Worst bit is that I was in the sh*tter when I had a missed call from one of the HSE guys about it...

Edited 22/01/15 02:40 AM by .Stripes.

[GSP07R]

Bosses who know how to transport items quicker than the transport company.

[Buf-Phoon]

Poor form and worse management skills from the GM IMO.

Hardly motivating for you but I'm sure that there were a few whispers

of "cheap shot". Bloke is only making his and his managers job harder.

Never bollock people in an open forum.Can have a snowballing effect on morale

People remember sh*t like that. Sounds like the GM has small peepee syndrome.

Tip. Stay above it. You're better than that. Have a respectful discussion with

your DM if you think it will help. Feedback can work if delivered and received

in the right spirit.

[Ralph Wiggum]

Take a dump in the gm's hardhat.

[Buf-Phoon]

and use his suede to clean up.

Ruke, you're not helping lol

["Captain Retard"]

WPMO

Wheel aligners - 12 and a half thou and swapped at 5 & 10 thou.. Saw signs of it at the last swap but 2 and a half thou later......bam

Lucky a mate picked it up this arvo coz that's a bit fuggen dangerous

Don I replaced the tyres on the wife's FG yesterday for exactly the same thing.

Although not as bad as yours, the RH front had some canvas showing.

The rears were almost gone and both fronts would've needed changing in another 3-5000ks.

I suspect it's not wheel alignment but the bushes starting to get soft on the lower control arms and when you brake the inside of the tyres are baring the brunt of the wear.

I threw on some cheap tyres and will watch them closely .

Eventually I'll pull the lower arms off and take them into Pedders to remove the old bushes and replace the balljoints, and then I'll put some Supapro bushes in.

Let me know what your "experts " say as I'm curious, pm me if you like.

Cheers.