ALIEN-XR6T Bronze Donating Members 16 Member For: 12y 3m 27d Gender: Male Location: from a planet far far away, but now in Sydney Australia Posted 03/08/12 11:33 AM Share Posted 03/08/12 11:33 AM Hi all , just wondering hows the best way to take off the mark from standstill cos I will be going to wsid soon...mate says to step on pedal slowly all the way down..but I just stomp hard on it all the way down..I got a fg xr6t auto.Thanks to all who can reply. Link to comment Share on other sites More sharing options...
old_mate Member 767 Member For: 18y 9m 15d Gender: Male Location: Brisbane Posted 03/08/12 11:39 AM Share Posted 03/08/12 11:39 AM ummm.get to 100% throttle (more importantly, 100% boost) as quickly as you can without the rear tyres braking traction.The fastest way I have heard of people doing it is forcing it into second, stalling it against the break then dropping back to 1st and leaving as hard as you can Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 18d Gender: Male Posted 03/08/12 12:19 PM Share Posted 03/08/12 12:19 PM Brake as hard as you can Accelerate slowly untill you build boost then when ready smash the pedal and jump off the brakes....I found 5psi to be perfect to net a 1.80 60ft! Link to comment Share on other sites More sharing options...
ALIEN-XR6T Bronze Donating Members 16 Member For: 12y 3m 27d Gender: Male Location: from a planet far far away, but now in Sydney Australia Posted 03/08/12 12:21 PM Author Share Posted 03/08/12 12:21 PM thanks guysHi kosij, mate I just dont know what "5psi perfet to net a 1.80 60 ft" means ? Link to comment Share on other sites More sharing options...
bossmang FREAKY Donating Members 12,425 Member For: 14y 11m 3d Gender: Male Location: Melbourne Posted 03/08/12 12:51 PM Share Posted 03/08/12 12:51 PM (edited) you own a turbo car, and you are going to the drags...yet you dont know what "5psi perfet to net a 1.80 60 ft" means ?dude common Edited 03/08/12 12:51 PM by Ford Freak Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 18d Gender: Male Posted 03/08/12 01:38 PM Share Posted 03/08/12 01:38 PM (edited) Stomp on the brakes accelerate while on the brakes! DON'T BREAK TRACTION! When your boost gauge is about 5psi release the brake and stomp on the accelerater. This makes you leave the line with boost and makes the turbo kick in quicker and reduces the lag. Making your take off alot quicker 60ft is the first 60ft from the start line!!!! So 1.8 seconds to get to 60feet!!!!!! 1.8 and under is good anything over will affect your total time alot.... Edited 03/08/12 01:41 PM by Kosij Link to comment Share on other sites More sharing options...
ALIEN-XR6T Bronze Donating Members 16 Member For: 12y 3m 27d Gender: Male Location: from a planet far far away, but now in Sydney Australia Posted 03/08/12 01:45 PM Author Share Posted 03/08/12 01:45 PM ok thanks kosij..my ride is not modded and plus I dont have a psi meter gauge...so I suppose that's about 2500 rpm then let go of the brakes and smash the throttle pedal huh. Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 18d Gender: Male Posted 03/08/12 01:53 PM Share Posted 03/08/12 01:53 PM (edited) Yeap just don't break traction or else you will be wasting your time you will get better after every run.... I started at about 2100rpm and went to about 2400rpm to much and you will just wheel spin. Good luck and enjoy your self be warned it gets bloody addictive and being an fg your turbo is smaller then the ba bf ones so your actually get power quicker..... So your 60ft time should be low... Edited 03/08/12 01:55 PM by Kosij Link to comment Share on other sites More sharing options...
ALIEN-XR6T Bronze Donating Members 16 Member For: 12y 3m 27d Gender: Male Location: from a planet far far away, but now in Sydney Australia Posted 03/08/12 01:57 PM Author Share Posted 03/08/12 01:57 PM Im thinking of doing a small mod on my XR6T = just a flashtune [x3] and a exhaust mod..good enough ??ahh so 60ft means 60 feet in length along the bitumen?and 1.80 means the time it took in secs to reach 60 feet !!! ok got it Link to comment Share on other sites More sharing options...
Glouva1 Donating Members 654 Member For: 13y 4m 24d Gender: Male Location: Surrey Hills, Melbourne Posted 03/08/12 02:05 PM Share Posted 03/08/12 02:05 PM Correct weight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now