Jump to content

Recommended Posts

  • Member
  • Member For: 13y 11m 8d

hey guys, having a bit of an issue that I could use some insight on, stressing me out hardcore. ive had a bit of a read around the forum and ive found a few answers.

I have a ba xr6t auto with, plazmaman cold side piping, under battery intake and process west intercooler, 4' dump, 3.5' cat, twin 2.5' pipes, 60lb injectors and have had it tuned in syd. I have nizpro valve spring that il be installing real soon. it made 320kw @15psi and while it valve bounces a bit atm (only under WOT), under moderate to heavy loads ive noticed it spikes boost. gauge goes upto 20psi so its probably spiking higher than that. I figured the culprit would be the wastegate actuator and after reading around abit have found they are quite flimsy and I should upgrade this.

what actuators is everyone using and whats working? im leaning towards buying a 12psi actuator. (anyone bought turbo smart?) will I need a retune after this is installed? (I really hope not) do I NEED to do the flapper mod as well or is it reccommended? I will contact my tuner when I get some parts and cash together but just seeing if anyone can offer any advise as I have too many cars and not enough money and this is a real bummer as I havent been able to feel any power this car has practically since ive owned it. plus I dont want it to throw a leg out of course.

Link to comment
https://www.fordxr6turbo.com/forum/topic/81191-boost-spikes/
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 17y 1m 3d
  • Gender: Male
  • Location: Vic

You REALLY DO need a waste ate port and 12psi actuator AND a retune.

Seeing 20psi should scare the I <3 Bananas out of you. ESPECIALLY on a Ba bottom end.

  • Like 1
  • Bronze Donating Members
  • Member For: 13y 8m 27d
  • Gender: Male

Mine has seen 23 psi (bf1 engine) I run 18psi daily... I use a turbosmart iwg75 actuator with 10psi spring combo.... Henz is right though you really should have ported wgate and actuator at your level...

  • Member
  • Member For: 13y 11m 8d

damn. what boost levels are safe to run without porting? when I got it tuned he said its all good I just need to do the valve springs. since then I have discovered im missing a load of mods that I should have done.

  • Member
  • Member For: 13y 11m 8d

well honestly I dont know how he got a power figure, everytime I booted it, it bounced. so il be driving granny styles indefinatly. so I dont know, im very worried which direction il take with it as I dont really have the money for it. maybe il just take it somewhere else and get it de-tuned so its running lower boost. looking into my options :(

  • Like 1
  • 1 month later...
  • Inactive Members
  • Member For: 14y 2m 22d

did you find u could ease your foot on the throttle to get the boost up around 6 or 7 then punch it it would run fine but if you punched it from the start it would spike like a mo fo? cause im having that problem with my 6 speed t. and I dont know how to go about it. ive changed the accuator could it possibly have something too do with fuel pump? im lost for ideas

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 17y 1m 3d
  • Gender: Male
  • Location: Vic

What mods? Wastegate ported?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'