Jump to content

Leighs Ed Turbo


retro-xr6t

Recommended Posts

  • 3 weeks later...
  • Donating Members
  • Member For: 14y 11m 13d
  • Gender: Male

More progress on the car today, got the 9 inch back from Final Drive yesterday and its now fitted back into the car, looks pretty tough.

Has a brand new 9 inch housing, 31 Spline Toms Axles, Strange Centre, True Track and 3.73 final drive ratio.

9inch.jpg

diffin.jpg

3.5" Dump pipe to Cat and 2" screamer welded up.

dumpscream.jpg

Also have a polished Power steering reservior cover sitting at home ready to go on.

Link to comment
Share on other sites

  • 4 weeks later...
  • Donating Members
  • Member For: 14y 11m 13d
  • Gender: Male

Another update

Proof is in the pudding with the old saying, Double your budget and triple the time you expect on your build. The ED didn't make powercruise this year despite the efforts of everyone involved, we called it quits a couple days before the event realising that even if we got it running, it still needed milage on the clutch, diff, box and motor before it could be given the kind of abuse I was gonna give it at the event. So in the interest of preservation it was put aside for a week or so.

The rocker cover was pulled off for some mods for catch can and breathers and such, while BYE Performance Fitted the dump pipe and screamer to the car.

40E7FA4F-B789-4B75-A7E4-92C5E117AA4A-148-000000111B7C6579.jpg

The Custom 3.5" tailshaft was ordered and picked up a couple days later and fitted, swaybar was in upside down, its now fixed lol. No hitches there everything seemed to line up all good and Once that was in BYE Performance welded up the rest of the exhaust system, comprising of a 4" body 100 Cell cat and 3.5" stainless steel pipe all the way through to the tip with 2 mufflers.

EC4119C4-B121-48C7-B032-249939965D71-3324-00000420C39C96DA.jpg

After the mods to the rocker cover it was sent off for paint. I Went and picked up the rocker cover and scorcher bar from Outter Limitz Spraypainting after Alan had worked his magic on them. I only took photos of the scorcher in my Force 8 lol, dunno why.

38522FE3-7485-487E-893F-0E7BA3BA890F-148-000000111E1AB331.jpg

440D0FAA-E4AB-45C6-9DDB-221922CC677B-148-00000011321C884A.jpg

1E90DA45-EDC8-4BB9-9040-C463532D6C86-148-000000112618E5ED.jpg

I ordered and recieved my AIM MXL Strada dash pack as well. The second pic being for show purposes only from their website.

1349925313391_zps0a7fc6e3.jpg

MXLStrada_zpscf7e8421.jpg

F1 Spec on the ED wheel, minus the horn :P haha. It will be installed where the OEM dash cluster is, once it is removed.

1349925403612_zpsf5db916b.jpg

Rocker cover refitted and some wiring happening now as well.

RCpaintfitted_zps245d9193.jpg

So things are slowly going forward again, have got some Au upper arm to stub axle adaptors on order, they allow you to get much more caster, which helps with turn in grip by giving dynamic camber n shiznit. So will be good for tracking it.

Cheers for reading.

Edited by retro-xr6t
  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'