Ba Xr6T Rear Center Brake Light Help

[mikea1988]

Hey guys

I have removed my rear spoiler to place a force 6 lip on the boot. Have also removed the factory sub.

Just wondering what and how can I add a rear center brake light into this space in order to have the legal required 3 brake lights??

Your help is greatly appreciated.

[Azid]

Go to wrecker and find one if the factory parcel shelf brake lights n wire it in its only the vehicles with premo sound that came without it from what I believe

[bionicxr6t05]

You can pilfer what you need out of any base model! Wire it up to the spolier brake light wires

[mikea1988]

But my parcel shelf has the mold for the sub in it. Either I cut this out or cut a hole in it horizontally and stick the rear light assembly up inside with just the light showing. Not sure.

[bionicxr6t05]

Id get the parts you need and go from there, may be able to modify the light housing?

[Azid]

not 100% sure so dont quote me but from memory when I pulled mine out when stripping I looked at new one and it looked like there would be enough room to fit it behind the sub as the sub sits in the middle and the small break light fits into the angle of windscreen, like bionic said id get the parts needed its a lot easier to work things out when your looking at them. Alternatively you could just pick up a thin red LED bar and mount it somehow in the back parcel shelf or top of back window

Edited 26/07/12 06:19 AM by AzidRush