El Andrew Gold Donating Members 2,035 Member For: 9y 6m 30d Gender: Male Location: Canberra ACT Posted 03/01/24 10:17 PM Share Posted 03/01/24 10:17 PM Just impulse bought the FG paddle shift kit from PVS which is currently $250. I'll do a write up with photos when I install it if there is anything that ends up needing more detail than the included instructions 1 Link to comment Share on other sites More sharing options...
biddie_fiddler [IMPULSIV3] Donating Members 1,374 Member For: 5y 7m 23d Gender: Male Location: Perth, WA Posted 03/01/24 11:39 PM Share Posted 03/01/24 11:39 PM AFAIK you need to tap into some wires from the TCM, I hope to see some twist and tape methods here or else its not sloppy enough All seriousness though, don't solder these for the love of god. Use a proper crimp connector like a butt splice 1 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 6m 30d Gender: Male Location: Canberra ACT Posted 04/01/24 10:14 AM Share Posted 04/01/24 10:14 AM Will actually be the first thing I've installed that requires cutting any factory wires - every other gauge, fan, switch, sensor I've added all come off a fuse piggy back (to either power the device or trigger relays off the battery) Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,893 Member For: 9y 9m 22d Gender: Male Location: South Australia Posted 07/02/24 06:25 AM Share Posted 07/02/24 06:25 AM I installed a bunch of smart light globes around the house recently. I linked them to my Google account so now I can tell my phone to switch whatever light on to whatever brightness or colour. You can also set them to turn on and off at various times, the same as setting your alarm. Kind of expensive at $10 each but beats getting off the couch at movie time or even getting into bed. Can set them real low too Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,984 Member For: 16y 7m 11d Gender: Male Location: Melbourne Posted 07/02/24 06:27 AM Share Posted 07/02/24 06:27 AM smart globes are great until you set the switch to "on" and then your phone doesn't connect to the wifi straight away or the google voice prompter (or whatever you use) doesn't work straight away, so you're stuck in the dark for a lot longer than is ideal haha ... Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,893 Member For: 9y 9m 22d Gender: Male Location: South Australia Posted 07/02/24 06:59 AM Share Posted 07/02/24 06:59 AM I have squeaky floor boards so I can navigate my house in the dark lol Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,984 Member For: 16y 7m 11d Gender: Male Location: Melbourne Posted 07/02/24 07:24 AM Share Posted 07/02/24 07:24 AM you can... but what about people you bring over haha Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 6m 30d Gender: Male Location: Canberra ACT Posted 07/02/24 08:21 AM Share Posted 07/02/24 08:21 AM Yeah I've got a few. I find in some rooms they are great (eg lounge for dimming, bedroom for turning off lights when in bed, etc) but some rooms like passageways it is more convenient to flick a switch as you walk past.I have a few things where lights look great (downlights in some glass front cupboards, LED strip inside the entertainment unit) that you would never bother turning on. So have them all linked and set on a routine to come on an hour before sunset. Worst thing is when there is a very quick power outage at 3am and all the lights go into setup mode and start flashing! Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,893 Member For: 9y 9m 22d Gender: Male Location: South Australia Posted 07/02/24 11:00 AM Share Posted 07/02/24 11:00 AM 2 hours ago, El Andrew said: Worst thing is when there is a very quick power outage at 3am and all the lights go into setup mode and start flashing! Pretty sure I'll throw them all in the bin if that happens! Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,984 Member For: 16y 7m 11d Gender: Male Location: Melbourne Posted 08/07/24 01:18 AM Share Posted 08/07/24 01:18 AM Finally bought my own ladder multi-function aluminium (as pictured) hopefully it'll last longer than me, based on how well-regarded Bailey ladders are. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now