greenmile79 Member 8 Member For: 12y 3m 9d Posted 17/07/12 12:00 PM Share Posted 17/07/12 12:00 PM Hi guys,Ive been going through all the posts trying to figure out what springs to order.Ive bought bilsteins & kings and need to let the guy know which spings I want.I told him I wanted;Fronts KFFL-57SSLRear KFRL-68SSSLThe guy told me SSLs would be too low, and I only want SL's.What sort of heights will I get out of these springs. I want it to look lowered.I dont want to look like a half attempt to lower it.Thanks in advance. Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 7m 23d Gender: Male Location: SW Sydney Posted 17/07/12 10:10 PM Share Posted 17/07/12 10:10 PM What you need to check is the height of the spring seat on your standard shocks. Then you can figure out what part number you need. If you measure from the bottom bolt on the front strut (where it bolts to the control arm) up to the spring seat you will get either 205mm or 250mm. Generally the BF2 came with shorter springs than the BA/BF1 - a design change to reduce the front springs bowing under compression - but sometimes it goes the other way round.If you have the 250mm measurement you have the BF2 struts and you need the KFFL-53SL part number, otherwise you will need to the KFFL-57SL I would suggest using SL in the front as the lowest, the SSL will make the Bilsteins a waste of time since there will be very little travel left. 1 Link to comment Share on other sites More sharing options...
greenmile79 Member 8 Member For: 12y 3m 9d Posted 17/07/12 11:47 PM Author Share Posted 17/07/12 11:47 PM You sir are a champion.The car is a 12 month '06, took the measurement, its 205mm. Stuck with the KFFL-57SL.Ive bought all the front end bushes & shortened bump stops, Ill keep you in mind when I buy the rear end bushes.Thanks again! Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 2m 28d Gender: Male Location: NOR, Western Australia Posted 17/07/12 11:55 PM Share Posted 17/07/12 11:55 PM I used kings SL/SSL's on mine yesterday, this is what it looked like before:And after:I suppose the hill doesn't really help in showing the differences lol but it's slightly lower, definitely doesn't sit as high. Link to comment Share on other sites More sharing options...
greenmile79 Member 8 Member For: 12y 3m 9d Posted 18/07/12 12:04 AM Author Share Posted 18/07/12 12:04 AM Thanks for the pics. Glad Ive gone "SSS"L's for the rear, I definately want it lower than that, Im even second guessing the front now LOL Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 2m 28d Gender: Male Location: NOR, Western Australia Posted 18/07/12 12:09 AM Share Posted 18/07/12 12:09 AM Yeah the front I don't mind on mine, I like the height but the rear could have been dropped a few more Link to comment Share on other sites More sharing options...
greenmile79 Member 8 Member For: 12y 3m 9d Posted 18/07/12 12:11 AM Author Share Posted 18/07/12 12:11 AM (edited) Ciaren, do you know what the height is from centre of wheel to guard with those?You said you only jsut done them so they may drop a little yet I suppose... Edited 18/07/12 12:12 AM by greenmile79 Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 2m 28d Gender: Male Location: NOR, Western Australia Posted 18/07/12 12:27 AM Share Posted 18/07/12 12:27 AM I'll have to measure it tonight (no tools at work lol) but yeah hopefully they drop slightly Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now