FairlaneG Member 68 Member For: 12y 7m 6d Gender: Male Location: Hervey Bay Posted 15/07/12 02:31 AM Share Posted 15/07/12 02:31 AM G'Day ,I have done a conversion on my 05 BA Fairlane Ghia. I have converted it with all factory bolt ons IE: Intake/Exhaust,Turbo,Dump pipe,Intercooler/piping All donated from a lil sister "BA XR6T"All has gone smooth thus far only costing me $950 & 2 weeks after work. I have opted to go manual on the boost control using a drift boost valve. REASON being the Fairlane never came with the extra switch on drivers side (Headlight) To plug in the loom required for ECU control.Also I have had too use MAP1 sensor to start car as MAP2 is not being to open to talking with the ECU at this stage hence the reason for my post.Question here Gent's Isssss, What steps do I take from here..... Do I need to go to FORD to get them to programme the ECU to Recognize the MAP2 sensor or should I just get that done when I go for a custom tune or....... Can Any one please shed some light on this subject as I'm near completion & its going to be another Expensive Daewoo eater out to show supremacy on the street's!Ohh I nearly forgot to mension in relation to the MAP1 & 2 sensors,the car never started with the MAP2 is this normal? Also I was told to when rewire the MAP2 Switch "As the MAP1 switch is different" To Wire it in reverse so ..... 1234 - 4321 Is this correct also ?Thanks in advanceDan 2 Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 1m 3d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 15/07/12 03:27 AM Share Posted 15/07/12 03:27 AM I cant answer your questions, but wanted to say good work mate for the coin you have done extremely well... 1 Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 6m 3d Gender: Male Posted 15/07/12 03:49 AM Share Posted 15/07/12 03:49 AM Fairly sure the pcms are different and cant load turbo calibration in never tried myself.... Ratter where are you Link to comment Share on other sites More sharing options...
Slash Donkey Dick Member 801 Member For: 14y 10m 11d Gender: Male Posted 15/07/12 04:10 AM Share Posted 15/07/12 04:10 AM Do you have access to the loom & ecu from donor car? Much simpler process if so, plus the added bonus of being able to run closed loop boost settings among an array of other things. Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 8m 14d Gender: Male Location: adelaide hills- 'race air' central Posted 15/07/12 11:12 AM Share Posted 15/07/12 11:12 AM I always liked the idea of doing this. nice work Link to comment Share on other sites More sharing options...
FairlaneG Member 68 Member For: 12y 7m 6d Gender: Male Location: Hervey Bay Posted 22/08/12 06:03 AM Author Share Posted 22/08/12 06:03 AM I cant answer your questions, but wanted to say good work mate for the coin you have done extremely well...Sorry for the late reply'(s)Thanks Stained. I am still fine tuning this projest at a cost of now" 1,800- As I just purshased the FF@ from CAPA.In saying that the tune uploaded to that is IDK "Weird" If I could put it that way because..... It booste's at 9PSI but first gear (5speed AUTO) flattens out at 60klph???2nd well that kind of changes early & randomly to 3rd then stays in 3rd for a second then straght off to 5th(overdrive) ????Had to change plugs to get rid of rediculas pingging & retart the timing to -4 0-2000 -2 2000-4000 & -2 4000-8000 on the settings on the flash controller. Also set fuel to 6% richer but still pings a little (Pingging to me is very nerve racking) as we all would feeel... So Im just at the stage of getting opinions to smooth out this stage im at..... IE:- A tune?? Who to Tune??Or any insight from you bloke's...Fairly sure the pcms are different and cant load turbo calibration in never tried myself.... Ratter where are youRatter where are you !!!?? *grinzDo you have access to the loom & ecu from donor car? Much simpler process if so, plus the added bonus of being able to run closed loop boost settings among an array of other things.Erm no I dont but I could if needed "Id hunt one down"I always liked the idea of doing this. nice workThanks Panda , its a nice feeling riding in a turbo/luxury/presige Fairlane with a turbo that's for sure....Next is to put a 6 speed box in her!! Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 11m 3d Gender: Male Location: Geelong, Victoria Posted 22/08/12 07:02 AM Share Posted 22/08/12 07:02 AM No good mate. Hope you get it sorted soon Lol you used the quote button for stanio's post, don't forget for any others so you don't confuse is :s Link to comment Share on other sites More sharing options...
spinr33 Donating Members 964 Member For: 13y 5m 13d Posted 22/08/12 07:59 AM Share Posted 22/08/12 07:59 AM Just a question mate u got a generic tune from caps to suit a xr6 turbo ???? If u did will be running way to much timing for the n/a motor you need a custom tune to make it run properly also if you want the motor to live !!! I susgest putting it back to stock until u get the custom tune.Also what are u using to control boost a bleed valve ? Link to comment Share on other sites More sharing options...
Jozekin New Member 12 Member For: 13y 3m 25d Gender: Male Posted 31/08/12 10:02 AM Share Posted 31/08/12 10:02 AM hey mate just a question with the NA block that you started with, did u need to drill and tap thread for the oil and cooler lines and the turbo return line to the sump? or does the NA block have them all just blocked off ? thanks mate Link to comment Share on other sites More sharing options...
FairlaneG Member 68 Member For: 12y 7m 6d Gender: Male Location: Hervey Bay Posted 26/10/12 03:01 AM Author Share Posted 26/10/12 03:01 AM (edited) Just a question mate u got a generic tune from caps to suit a xr6 turbo ???? If u did will be running way to much timing for the n/a motor you need a custom tune to make it run properly also if you want the motor to live !!! I susgest putting it back to stock until u get the custom tune.Also what are u using to control boost a bleed valve ?Yes, I did. Mind you I also got it specked with the fact it's a NA/No boost solenoid ect plus I used the unit to -4 degree's as well as drive it like NANA Maskuuri on a sunday. Its been in garage as I lost my license till DEC also.Yes boost control bleed system by Turbo smart.Spinr what timing does the STD turbo run with TDC or +4 ????hey mate just a question with the NA block that you started with, did u need to drill and tap thread for the oil and cooler lines and the turbo return line to the sump? or does the NA block have them all just blocked off ? thanks mateJozekin I had to tap out oil return line. I used from memory A 10mm Drill for hole & M8 for bolt threads. For the oil feed in I just went down to AUTOPRO & got me A T piece. Took out oil pressure switch & put T piece in & yer....Put oil pressure switch in the T & the oil feed in line to it. **Got a custom Italian hosed (Hydrollic)custom made. Edited 26/10/12 03:16 AM by FairlaneG Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now