Jump to content

Stock Xr6T


spoken

Recommended Posts

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 5d
  • Gender: Male
  • Location: Probably above atmospheric pressure

They run 12's stock in auto trim anyway :)

Link to comment
Share on other sites

  • Donating Members
  • Member For: 13y 3m 3d
  • Gender: Male
  • Location: Randwick, sydney

if you want a better sound from the FG ute remove the centre muffler and replace with twin pipes..... exhaust places will be able to do it and should only cost you $100-$150.

Can also buy a CAI and install it yourself for under you $600 price tag and will give it a much louder spool sound also if that's what your after

  • Like 1
Link to comment
Share on other sites

  • billet turbos and weathered engines dont mix
  • Donating Members
  • Member For: 12y 6m 7d
  • Gender: Male
  • Location: Wollongong

As irmcdowell said,

Replace one muffler with straight through pipes. AS LONG AS ITS MANUAL. I have rear muffler delete with twin 2.5 and it's a bolt in bolt out section. 4 inch intake and it already sounds amazing to me! Loud spool and a very decent note for a 6 :D

  • Like 1
Link to comment
Share on other sites

  • Donating Members
  • Member For: 12y 4m 26d
  • Gender: Male
  • Location: sydney prestons

its auto lol....I like the idea of twin pipes..not really a fan of the stock ones they looks kinda like something from a spaceship....might go hit up liverpool exhaust see what they got.....

Link to comment
Share on other sites

  • I am dissatisfied with my current employment situation
  • Donating Members
  • Member For: 18y 2m 1d
  • Gender: Male

Get a k&n panel filter and a vcm tune.. You dont need an xcal unless you want it for the zf tune or to change tunes

Link to comment
Share on other sites

  • Thooperrrrrrr
  • Donating Members
  • Member For: 13y 4m 27d
  • Gender: Male
  • Location: NOR, Western Australia

^ this, saves you plenty and especially if you just want a tune without the mods, you won't need to switch between tunes.

On the B series, I'm pretty sure the biggest factor is the injectors, need to go to atleast 42lb to get over 250/260kw. Then is the cat. Not sure on FG's though

Link to comment
Share on other sites

  • Donating Members
  • Member For: 12y 4m 26d
  • Gender: Male
  • Location: sydney prestons

I rang castle hill proformance.....they said not to go with the vcm but a xkal or something like that....1,500 not cheap....he said stock well be fine and if after I wanna do more mods to the car no dramma can just update the ecu or something....hmmmmm

whats the rwks on a stock xr6t fg ?

Edited by spoken
Link to comment
Share on other sites

  • Thooperrrrrrr
  • Donating Members
  • Member For: 13y 4m 27d
  • Gender: Male
  • Location: NOR, Western Australia

Yeah 270 flywheel, then depending on manual/auto you get about the above.

If you 100% only want this initial tune done, you really don't need the xcal3. Chances are though you'll want to mod further down the line and the Xcal will be needed anyways. It's usually about 799 for the Xcal, and 600odd for the first tune (depends where you go and how long it takes them to tune it. With no mods it shouldn't be too hard).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'