nitro xr6 turbo Banned 185 Member For: 12y 11m 18d Gender: Male Location: perth wa Posted 14/04/13 10:42 AM Share Posted 14/04/13 10:42 AM block the BOV all togeather.or buy a VL, but who would do that?cheers 1 Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 13d Posted 14/04/13 11:29 AM Share Posted 14/04/13 11:29 AM Found the 5c coin I misplaced......2013-04-13 12.44.47.jpgFark that! 1 Link to comment Share on other sites More sharing options...
sct911 Member 848 Member For: 11y 11m 26d Gender: Male Posted 14/04/13 11:49 AM Share Posted 14/04/13 11:49 AM (edited) Put a filter on the BOV making the pshh sound louder. Any hints how I can get the flutter noise ? to get flutter you will need to remov the bov and block up all the holes, including blocking vacuum line with a screw or something small.You will have a small flutter sound, to make it louder you will need to get a K&N filter and cut a hole in the bottom of the airbox. I did this and was satisfied.A week later I got the rear exhaust chopped off and replaced with a straight 3", this made the flutter the loudest it has ever been :Svids of my TUTUTUTUTUTUTUhttp://www.youtube.com/watch?v=4ld18skOX9whttp://www.youtube.com/watch?v=Q7itTI74v1A&feature=player_embedded Edited 14/04/13 11:52 AM by sct911 Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 21y 9m 1d Gender: Male Location: Sydney Posted 14/04/13 02:31 PM Share Posted 14/04/13 02:31 PM years ago I would have contemplated pulling a dash out to do a ICC upgrade/fix mixer shaft/whatever, but the thought now sends shivers down my spine...I happily pulled the dash out of the XC to do a heater core about 5 years ago, but these days ill pay for that chit to get done.rukey, hats off to ya Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 9d Gender: Male Location: Perth Posted 14/04/13 10:31 PM Share Posted 14/04/13 10:31 PM It's not a bad job, I wouldn't recommend anybody approaching 6 foot attempt it and you'll be spending most of the day crouched in the car.I'm very happy to have the dual zone working, I also managed to fix my auto headlights that haven't worked since I've owned the car. (it always helps if the sensor is plugged in......) and I had a fiddle with the clutch MC mounting position while the dash was out and that seems to have cured my dodgy shifts.I had a random evaporator water leak onto the carpet but that seems to have cured itself and my car now piddles on the ground like it always has.......... Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 1d Gender: Male Location: Adelaide Posted 14/04/13 10:35 PM Share Posted 14/04/13 10:35 PM Spiders and gunk blocking it ? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 9d Gender: Male Location: Perth Posted 14/04/13 10:43 PM Share Posted 14/04/13 10:43 PM Possibly,didn't do it before the dash came out, did for one day after the day went back in, Now doesn't do it. Might have to make a warranty claim against the clown that pulled the dash out.........................................................................................................oh wait nevermind. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 1d Gender: Male Location: Adelaide Posted 14/04/13 10:44 PM Share Posted 14/04/13 10:44 PM Haha did u find the firewall flexing when the clutch is pressed causing your average shifts ?What was the go u reckon ? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 9d Gender: Male Location: Perth Posted 14/04/13 10:49 PM Share Posted 14/04/13 10:49 PM I loosened the MC mounting bolts, Pulled the clutch pedal all the way against the return stop and re tightened the MC mounts. My theory is that if over the last 9yrs the MC was moved away from the pedal the cylinder travel would be reduced. Theres 2-3mm of play in the mountings which equates to around 10% of the travel.At the end of the day bs theories aside. Sat morning before I pulled it apart an enthusiastic down shift required double clutching and rev matching other wise it would spit it out. Now as long as I rev match it drops into gear.Happy days. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 1d Gender: Male Location: Adelaide Posted 14/04/13 11:08 PM Share Posted 14/04/13 11:08 PM Win for the man hey Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now