Kosij Donating Members 2,045 Member For: 13y 5m 5d Gender: Male Posted 28/09/12 01:23 PM Share Posted 28/09/12 01:23 PM Yeahhh he said he's ported it out more and welded the bush so the flap should stay now. Hope all goes well now that gtx costed me $1650 with the boost nipple and this new one costed me all up $1640 no nipple :/ but I got the housing ported and all assembled with my actuator and bracket all done so can't complain just can't wait to inspect the port job....hopefully it's good. Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 2m 27d Posted 29/09/12 03:12 AM Share Posted 29/09/12 03:12 AM Got a wheel alignment for $66! Cheering on the price! And although most people would say cheap isn't good, they spent 3 hours adjusting all my camber, toe etc! Very happy with the job Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 8d Gender: Male Location: OZ Posted 29/09/12 05:32 AM Share Posted 29/09/12 05:32 AM yep at 0.6 u sure do get a perfict idleSarcasm much. I struggled with a slight miss at ir for ages until I cracked the $h1ts and bought the tuning software to look into it more. Is your idle timing steady, and if so what are you seeing? What squirters are you using? Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 7m 15d Gender: Male Location: Adelaide Posted 29/09/12 06:02 AM Share Posted 29/09/12 06:02 AM I was only being a sack lolRunning 60lb dekas but around 21psi up top so had to close the gap down to approx 0.6mm but sacrifice idle qualityJust the way it is at that gap Link to comment Share on other sites More sharing options...
GTEXXED Banned Banned 910 Member For: 12y 5m 26d Gender: Male Posted 29/09/12 06:52 AM Share Posted 29/09/12 06:52 AM Sounds like you need a boostaspark jet from kenne belle. Link to comment Share on other sites More sharing options...
IH8TOADS Silver Donating Members 3,618 Member For: 19y 6m 8d Gender: Male Location: OZ Posted 29/09/12 07:37 AM Share Posted 29/09/12 07:37 AM I know, all good 0.7 is usually fine at that boost? Keep an open mind :-) Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 21d Gender: Male Location: Far north queensland Posted 29/09/12 07:40 AM Share Posted 29/09/12 07:40 AM Yeahhh he said he's ported it out more and welded the bush so the flap should stay now. Hope all goes well now that gtx costed me $1650 with the boost nipple and this new one costed me all up $1640 no nipple :/ but I got the housing ported and all assembled with my actuator and bracket all done so can't complain just can't wait to inspect the port job....hopefully it's good.not taking the piss, but could you tell if the port job was up to scratch? Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 5m 5d Gender: Male Posted 29/09/12 07:54 AM Share Posted 29/09/12 07:54 AM I have pictures and comparisons that I have gathered from this lovely site, also I'm going to post pics up once I get it so yous can give me your opinions 2 Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 10m 19d Gender: Male Location: Geelong, Victoria Posted 29/09/12 09:06 AM Share Posted 29/09/12 09:06 AM (edited) Installed new aux cable from under the dash to the gap underneath the cig lighter. Have an android now so if I ever want to play something from that I can use the 3.5mm jack off the end of the aux cable. EBay job..$25Also can charge and play iPod at same time. The cable I had prior charged and played for first 2wks and no more charge. Checked fuse in it, everything. Donuts. Got it exchanged. Same thing again...left it ever since. About 2yrs ago lol. 2 cogs off eBay ~$40 or soAnd just finished putting a new cog in the door lock. Put that little black sleeve in the wrong way first time. Door was still unlocking from outside..I wasn't happy lol. Then realised my mistake when took it apart pic of the old pos one lol Edited 29/09/12 09:10 AM by Shyfrd Link to comment Share on other sites More sharing options...
FG50T Member 568 Member For: 20y 11m 2d Gender: Male Location: Melbourne Posted 01/10/12 02:17 PM Share Posted 01/10/12 02:17 PM (edited) PW stepped cooler Edited 01/10/12 02:20 PM by FG50T Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now