k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 01/11/19 11:28 PM Share Posted 01/11/19 11:28 PM very nice looking curve Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 22d Gender: Male Location: Adelaide Posted 01/11/19 11:55 PM Share Posted 01/11/19 11:55 PM Looking very nice Robin excellent power for boost on that 42 congrats mate it’s been a long time coming Link to comment Share on other sites More sharing options...
demon1300 Member 435 Member For: 12y 9m 13d Gender: Male Posted 02/11/19 12:57 AM Share Posted 02/11/19 12:57 AM Yeah cheers lads!Has def taken a while but the whole fam and house thing def takes precedence.Saw a peak of 574, but that was because we had a little boost spike I def didn't want to push it that hard without head studs etc. I'd reckon the pistons and rods would also be at their limits. Had some crazy variance with my wideband also which had us a little confused. The 4.9 connected to the haltech in the dump was reading crazy rich at like 10.5-10.7 and the one in the tail pipe was reading 12.0It def wasn't that rich as it sounded crisp as. Was around 13degs at peak torque and feeding it back in to around 17 up top. So def still conservative on ethanol. I can seem to find if the plug-in can do a free air cal on the wideband? Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 261 Member For: 12y 1m 16d Gender: Male Location: Griffith NSW Posted 22/11/19 11:54 PM Share Posted 22/11/19 11:54 PM Have been getting ca-donk ca-donk noises from the rear end for the last 2 weeks, worse when turning left.Turns out the diff is displeased with my driving. Link to comment Share on other sites More sharing options...
bloodycrashboy Feeling the Love :-) Bronze Donating Members 4,421 Member For: 11y 7m 22d Gender: Male Location: Not in Cairns anymore Posted 23/11/19 12:06 AM Share Posted 23/11/19 12:06 AM bugger Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 21d Gender: Male Location: Western Sydney Posted 24/11/19 08:34 AM Share Posted 24/11/19 08:34 AM Finally got motivated to work on the ute today.Pulled the steel plate off the tray and bolted the toolbox where it was.This allows the toolbox to have an access panel to the fuel hanger.Then cut the tray liner to fit around the toolbox and refit it.Going to aim to have the fuel pumps rewired next weekend. 7 Link to comment Share on other sites More sharing options...
Slowxr6t Member 560 Member For: 5y 11m 18d Location: New zealand Posted 25/11/19 02:56 AM Share Posted 25/11/19 02:56 AM Well today, I got my 15 fgx xr6t dynoed on the local dyna pack, we got a max of 414 rwkw at 18psi 98 octane fuel, we dialled it back to 382rwkw on 15psi to save the driveline and pistons. Garrett 3582 with .7 comp housing, 4 inch homemade steampipe dump, turbosmart 45mm external plumbed back in down bottom of exhaust, no cat, 4 inch exhaust up to the 3 inch flange under the car, pw stg 2 cooler, stock airbox, k and n filter. 2 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,985 Member For: 16y 7m 12d Gender: Male Location: Melbourne Posted 25/11/19 02:59 AM Share Posted 25/11/19 02:59 AM good stuff mate post up the dyno sheet? Link to comment Share on other sites More sharing options...
bupalooga Silver Donating Members 261 Member For: 12y 1m 16d Gender: Male Location: Griffith NSW Posted 06/01/20 07:37 AM Share Posted 06/01/20 07:37 AM Wetsanded & clear coated the headlights on the ute & the girlfriends nugget. Will buff & refit tomorrow. JB welded the bumper back together, the strips up the side that get clipped in had split from the bumper and the corners always popped out.Dropped the 6sp manual gearbox oil and filled with 4.8l of Penrite 75w-75. My new 12v toolpro ratchet is now thoroughly lubricated. lolWill do brake & clutch fluid once my safebrake lines turn up.QUESTION: can I fully unscrew the clutch bleed nipple so I can get an extension hydrolic line made up and screw said hose in its place? Anyone done this? 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 26d Gender: Male Location: Perth Posted 06/01/20 09:03 AM Share Posted 06/01/20 09:03 AM Yes. But maybe difficult with the gearbox in place Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now