bossmang FREAKY Donating Members 12,419 Member For: 14y 10m 16d Gender: Male Location: Melbourne Posted 09/06/17 09:30 AM Share Posted 09/06/17 09:30 AM hey el andrew was that you posting on the ford fg fb page with the car sky high in the air trying to get the rear exhaust out >??>? Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 6m 19d Gender: Male Location: Canberra ACT Posted 09/06/17 10:06 AM Share Posted 09/06/17 10:06 AM Clearance for installation is my issue. So yes that was me airborne going backwards, trying to stick a very precise landing! Might park on the lawn and dig a big hole. When I moved the car without the rear section, 4 year old reckoned "that sounded awesome". Brought a tear to my eye. Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 5m 10d Gender: Male Location: Adelaide Posted 09/06/17 11:07 AM Share Posted 09/06/17 11:07 AM Just use a hoist as the angle to get them out on a hoist is spastic let alone on a driveway with jacks etc etc Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 6m 9d Gender: Male Location: Western Sydney Posted 09/06/17 11:37 AM Share Posted 09/06/17 11:37 AM Surely if you can do a clutch in your driveway you can get the zorst done. Or are sedans that chit compared to utes? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,928 Member For: 16y 7m Gender: Male Location: Melbourne Posted 09/06/17 12:06 PM Share Posted 09/06/17 12:06 PM The stock exhaust on a sedan is one piece from the tailpipe to the other side of the IRS. It has a big u shaped bit that is hard to get over the IRS when the car is on the ground. If you don't want to keep the exhaust, just angle grinder it off haha Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 6m 19d Gender: Male Location: Canberra ACT Posted 09/06/17 12:32 PM Share Posted 09/06/17 12:32 PM Yep angle grinder FTW. Exhaust was cactus anyway. I think you might be right Jet - I'll be looking for a hoist in the morning for installation. Or side pipes... Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,928 Member For: 16y 7m Gender: Male Location: Melbourne Posted 09/06/17 12:37 PM Share Posted 09/06/17 12:37 PM it's easy enough to install aftermarket exhausts in the region because they usually have two sets of flanges, one either side of the IRS... or is it another stock one? Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,035 Member For: 9y 6m 19d Gender: Male Location: Canberra ACT Posted 09/06/17 12:47 PM Share Posted 09/06/17 12:47 PM Xforce S-series twin 2.5". Flange locations same as stock though. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 18d Gender: Male Location: Perth Posted 09/06/17 12:54 PM Share Posted 09/06/17 12:54 PM (edited) Remove the bumper cover, rotate the exhaust 90dege so the bends are horizontal and the opening the in the tube is facing the diff centre and swing the muffler out past where the bumper would normally be (it winds up sticking behind the rh rear wheel) start feeding the pipe over the cradle. Once you've got the flange past the cradle start to rotate the exhaust back into the correct position as you wiggle it forward. Edited 09/06/17 12:55 PM by Ralph Wiggum Link to comment Share on other sites More sharing options...
Tocchi Sandtrap Motorsport Donating Members 2,055 Member For: 15y 11m 16d Gender: Male Location: Perth Posted 09/06/17 01:29 PM Share Posted 09/06/17 01:29 PM Changed coils directly after a 40 min drive. sh*t was warm haha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now