k31th less WHY; more WOT Site Developer 28,999 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 03/06/17 01:51 PM Share Posted 03/06/17 01:51 PM any in-tank seems fine, from my experience, with the stock wiring setup. If you need more than an in-tank pump, then it gets complicated, wiring-wise. 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,916 Member For: 9y 9m 30d Gender: Male Location: South Australia Posted 04/06/17 12:04 AM Share Posted 04/06/17 12:04 AM You check how much amperage your pump will draw and if it exceeds the rating of the wire then you'll need thicker wire. Whether you need a relay or not depends on which wiring you are changing/upgrading. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 5d Gender: Male Location: Perth Posted 04/06/17 01:08 AM Share Posted 04/06/17 01:08 AM Factory connector and vapour side wiring is good for 30amps. Chassis side wiring is not. I've seen substantial volt drop to high volume in tanks with stock chassis side wiring. I doubt it would be an issue with a 255 though. 1 Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,999 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 04/06/17 03:03 AM Share Posted 04/06/17 03:03 AM fitted some wiper blades: no leaks from the fuel pump assembly after the first drive(s) after fitting It's fairly noisy good sign, imho. Then gave it a much needed wash as I hadn't done that for ages due to the amount of work I had to do to the car over the last weeks/months. Finally got a couple of side-on shots of the new brakes That XR6 badge on that side needs replacing haha. The "leak" wasn't fixed by the washer method :( will get the tuna to fix the leak, I think. 1 Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 5d Gender: Male Location: Perth Posted 04/06/17 03:11 AM Share Posted 04/06/17 03:11 AM What's happening with the old intank module kieth? Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,999 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 04/06/17 03:13 AM Share Posted 04/06/17 03:13 AM (edited) good question... It's just in the box the new one came from, at the moment, after letting all of the fuel within it evaporate. what do you think I should do with it? edit: also got the stock catalytic convertor cut out and a 100cpi catalytic convertor + y-piece fitted the other day; also for the tune this week. Edited 04/06/17 03:38 AM by k31th Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 1d Gender: Male Location: Perth Posted 04/06/17 03:37 AM Share Posted 04/06/17 03:37 AM (edited) Looking at the condition of it, 5c on ebay.... The issue with the high pots, is the lower the fuel gets the less effective they are. that's why I fitted my 460 to a factory pot. Edited 04/06/17 03:40 AM by arronm Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,999 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 04/06/17 03:39 AM Share Posted 04/06/17 03:39 AM yeah, the bin was my thought, too. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 5d Gender: Male Location: Perth Posted 04/06/17 03:42 AM Share Posted 04/06/17 03:42 AM I think you should remove the wiring connector from it and send it over this way. Link to comment Share on other sites More sharing options...
k31th less WHY; more WOT Site Developer 28,999 Member For: 16y 7m 18d Gender: Male Location: Melbourne Posted 04/06/17 03:43 AM Share Posted 04/06/17 03:43 AM including the pump? if you want it, just pay for postage and I'll happily send it over to you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now