What Did You Do To Your Car Today?

[arronm]

rollover  

[BAXRTUTE]

I drove mineto the shops and back.... yay!

[skidxr6t]

  On 28/10/2016 at 7:49 PM, FGMKII said:

By any chance with the exhaust rattle, is your car manual and did it go away when you pressed in the clutch? My manual has a rattle especially when cold and sounds for all money like the exhaust (metal on metal sound) but press the clutch and it goes away. Mine has done it since new.

Expand  

On my car its something todo with the rubber hangers on my xforce single exhaust. The pipe was bashing on the rear cradle. especially when turning right.

 

Annoying part is I didn't fully resolve it, there is another hanger in the middle of the exhaust with nothing for it to join onto. mechanics gona give me some hoist time so I can resolve it while hes doing the p/s line.

[camo86T]

  On 28/10/2016 at 7:49 PM, FGMKII said:

 

By any chance with the exhaust rattle, is your car manual and did it go away when you pressed in the clutch? My manual has a rattle especially when cold and sounds for all money like the exhaust (metal on metal sound) but press the clutch and it goes away. Mine has done it since new.

Expand  

What arronm said

 

If the noise isn't quite to your liking, upgrade to a ceramic twin plate

 

 

You'll have to concentrate to hear anything else

[arronm]

If you watch this video carefully. You will see the noise a car makes when "rollover"

 

 https://youtu.be/ifyA0YpnbjU

[barnz]

^^^ 10/10 azz did lol

[ROB83R]

  On 28/10/2016 at 10:28 PM, skidxr6t said:

On my car its something todo with the rubber hangers on my xforce single exhaust. The pipe was bashing on the rear cradle. especially when turning right.

 

Annoying part is I didn't fully resolve it, there is another hanger in the middle of the exhaust with nothing for it to join onto. mechanics gona give me some hoist time so I can resolve it while hes doing the p/s line.

Expand  

 

When you find where it's touching get some radiator hose and some clamps and wrap it around the pipe and clamp it on. 

If it's the muffler banging like in that vid see if you can attach some rubber to the chassis or something. 

That's if you can't stop it from swinging. 

 

 

What I done today is "high flow" my airbox. 

There's a 127mm hole in the rise on the base, an 80mm right on the base and a 102mm right in front. 

Wasn't going to do it and wait till I mod all the pipe work and go turbo side etc but I was running a pod straight off the airbox joiner and meh! When I seen jet post that just butchering it with the one hole could net you nearly 30rwkw I thought fark it! 

Bum dyno says he's right. It goes much better than with just the standard snorkel on there. 

Edited 29/10/16 08:51 AM by ROB83R

[Ralph Wiggum]

Started on this little project.  Some changes on the exhaust side are planned as well . 

 

@MattyP will dislike the exhaust side plans. 

 

 

[MBAF]

making the merge collector your self? nice!

[Ralph Wiggum]

Nah not me mate, a local bloke knocks them out at such a good price that it's not worth the effort by the time I source materials and find the time.