k31th less WHY; more WOT Site Developer 29,042 Member For: 16y 8m 10d Gender: Male Location: Melbourne Posted 13/11/15 12:13 PM Share Posted 13/11/15 12:13 PM not sure what faces have to do with it... Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 7m 27d Gender: Male Location: Canberra ACT Posted 13/11/15 01:01 PM Share Posted 13/11/15 01:01 PM Made a start on replacing rad hoses and power steering high pressure line. Good jobs to combine as can put it all back together in order that gives best access. But does anyone know how to separate the bloody rubber block on the cross member that the power steering hose sits in? Can't see any threads with anyone else struggling with that, so I'm assuming stupidity on my part. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 2m 27d Gender: Male Location: Perth Posted 13/11/15 01:33 PM Share Posted 13/11/15 01:33 PM There's a small lock tab that holds the top portion down.Push down on the clamp and use a screw driver to pry the side portion of the clamop off the lock 2 Link to comment Share on other sites More sharing options...
El Andrew Gold Donating Members 2,036 Member For: 9y 7m 27d Gender: Male Location: Canberra ACT Posted 13/11/15 09:25 PM Share Posted 13/11/15 09:25 PM Brilliant, thanks! Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 24d Gender: Male Location: NOR Perth Posted 27/11/15 03:01 PM Share Posted 27/11/15 03:01 PM I don't mind the white actually. Chuck em all on and put up a pic.Little late but did this today. Definitely sucked though...cause 30min job turned into 2 hrs. If you ever paint rims, try not to put too much down near hub area...had to scrape it off and hammer in my hub rings (maybe they expanded from heat?)...but basically they are stuck on now Took some pics after driving....265s on the front isnt that great so far...ill give it another week or so but probs end up chucking the 245s back on. Steering isn't heavy, just noisy tyres and feels a little rougher than my 19s for some reason... Link to comment Share on other sites More sharing options...
Lennox Member 2,586 Member For: 11y 9m 23d Gender: Male Location: Perth Posted 27/11/15 08:51 PM Share Posted 27/11/15 08:51 PM And you chucked a lift kit in the back as well? 2 Link to comment Share on other sites More sharing options...
.Stripes. All stock bar the k&n panel filter Silver Donating Members 8,061 Member For: 12y 9m 6d Gender: Male Location: Perth Posted 27/11/15 09:40 PM Share Posted 27/11/15 09:40 PM ^definitely needs moar low. Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 24d Gender: Male Location: NOR Perth Posted 28/11/15 05:12 AM Share Posted 28/11/15 05:12 AM And you chucked a lift kit in the back as well?You should have seen the other side lol I think its cause I left the handbrake on....dropped back down after a drive...as can be seen in other pics.Dan needs more car and less critiquing Link to comment Share on other sites More sharing options...
huggy_b Member 94 Member For: 11y 7m 28d Posted 28/11/15 05:20 AM Share Posted 28/11/15 05:20 AM You could navigate the powerlines at that ride height - how did you get the RTV ute suspension to fit a sedan? 3 Link to comment Share on other sites More sharing options...
PTR_NITRO_FG Donating Members 3,214 Member For: 11y 6m 24d Gender: Male Location: NOR Perth Posted 28/11/15 05:34 AM Share Posted 28/11/15 05:34 AM Its gunna be one of those days Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now