What Did You Do To Your Car Today?

[Wilko16]

If you fill until it overflows, you have put to much in

[hawlass]

Just on the ramp enough to get under it, about 100mm higher in the back, about 30ml difference at a guess. I did roll it back down to level to drain so it was empty.

I checked the manual before hand and it said fill to filler plug level (till it flows back out the filler hole)

I remember it took 2x 1 liter bottles of nulon last time I changed it, used penrite 2.5l this time.

[OZYWALKER]

Fitted new cold side hose because AC hose started to rub through the old one.

New screws for PW airbox.

New quick release battery terminals.

Went to change Thermostat and bloody bolt broke when undoing it. Thank fark for easy outs. New bolts and all good.

Ready to drop at CMS tomorrow

[.Stripes.]

When u need a further 80-100rwkw to do the same times as me no problems stripey bum

Well aware of that, I was purely responding to old mates statement about "more power"

this is a picture before I had power

and this is a picture with lots of power (lol)

I hated the power of the v8 (so boring ),but the most annoying part was the handling . the ute used to feel very front heavy to drive (very heavy to steer ) . but now with the turbo 6 it

rides nicer ,steers nicer ,and handles way better . trust me I know the turbo 6 is by far the superior engine Joyce by far . ps the engine got soled to the navy for target practice ,and

when they have finished with that they will use it to keep one of there markers in place by dropping the engine overboard with the marker attached to a rope . ok so they are still

useful for some things

Edited 16/11/14 09:34 AM by .Stripes.

[Serangan]

^lol^

Relocated the battery back to stock side cause new intake.

Also put new bov on. And replaced a coil ...

She cookda

Engine bay as it stands now

Stock Airbox does nothing but I had it lying around. And looks better with the gap filled

[demon1300]

Stuck some Nexen N6000's on the rear for $145 fitted each

Hopefully these are as good as the 3000's I had about 4 years back on a diff car.

They'll most likely end up sprayed over the road anyway...

[Bomber]

Replaced top long timing cover bolt that stripped - grrrr. Luckily the hole runs deeper so got an Ellen key headed high tensile 130mm bolt (OEM about 122mm). Painted it silver and replaced both sides so they match.

[matt036]

Sold it and watched it drive off down the road :(

[Wilko16]

Upgrade ?

[barnz]

have you got more pictures of your girlfriend in a bathing suit with out the safety ring on ?

Quality burn

Well aware of that, I was purely responding to old mates statement about "more power"

Also quality but not quite as good cause he is German... Edited 19/11/14 08:26 AM by barnz