f6mark Member 2,908 Member For: 13y 9m 18d Gender: Male Posted 04/01/14 10:44 PM Share Posted 04/01/14 10:44 PM just about 21psi in the mid to.. love it.. Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 11d Gender: Male Location: Sydney Posted 05/01/14 12:23 AM Share Posted 05/01/14 12:23 AM (edited) Ill have a look in the xcal for it, thanx TH. Marky it's hitting 21lb pretty much bang on 3k then fades at about 4 to 20lb. It'll only be like this for about another month, hopefully it holds up thru everything till then lol I think it's a mixture of things like better turbo, last one had a slight bend in the fin + the bearings were cactus. Took it in for a rebuild after sucking a bit of rubber through (from the standard joiner) and it's never been the same since, he didn't replace the front wheel just straightened it the best he could and replaced the bearings (my fault for trying to do it on the cheap.) The new (2nd hand) turbo seems to whistle nicer too if that even makes sense lol + now I have made the intake roughly half as long as before. I think it's probly a bit more efficient than b4 and that's the real problem. Even though preload is def. less than b4 it's still OB. Edited 05/01/14 12:33 AM by Kroozin 1 Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 11d Gender: Male Location: Sydney Posted 05/01/14 12:39 AM Share Posted 05/01/14 12:39 AM (edited) To now It's boxed in. To stay in topic with the thread title today I've increase front and rear camber so I can chew up my 255's on the twistys and go back to the right size tyre for the rim (ppl who say stick wider tyres on a skinny room should be shot lol) Also realigned the cradle a little better since it was sticking out one side a wee bit. Next up.. wheel alignment Edited 05/01/14 12:51 AM by Kroozin 1 Link to comment Share on other sites More sharing options...
MikeT36 Member 77 Member For: 11y 8m 20d Gender: Male Location: Perth Posted 06/01/14 02:11 AM Share Posted 06/01/14 02:11 AM Replaced the Centre hanger bearing, for anyone that has a manual equipped falcon that has driveline shunt I recommend replacing the hanger bearing as this bad boy makes a world of difference shunt is still there but no where near as bad as it used to be plus it's only a two hour job made easier if you have a rattle gun Link to comment Share on other sites More sharing options...
MikeT36 Member 77 Member For: 11y 8m 20d Gender: Male Location: Perth Posted 06/01/14 02:20 AM Share Posted 06/01/14 02:20 AM Fitted some new rims for it. Went from standard 17" ba rims to these nice onesIMG_0793.jpgLooks Nice didn't think those FG rims would suit but I must eat my words haha 1 Link to comment Share on other sites More sharing options...
Serangan Member 103 Member For: 11y 2m 10d Gender: Male Location: Hobart, Tasmania Posted 06/01/14 05:21 AM Share Posted 06/01/14 05:21 AM Fitted some new rims for it. Went from standard 17" ba rims to these nice onesIMG_0793.jpgLooks Nice didn't think those FG rims would suit but I must eat my words hahaYeah. I'm very happy with the looks now. Only problem is they make my rotors look tiny haha Link to comment Share on other sites More sharing options...
willo88 Member 700 Member For: 12y 10m 7d Gender: Male Location: Newcastle Posted 06/01/14 06:52 AM Share Posted 06/01/14 06:52 AM Installed me new gauges. F*** it was the biggest relief when I turned the key and it worked as advertised after all the jinning around. Will get some night time pics when sober again. 4 Link to comment Share on other sites More sharing options...
tobylee Member 120 Member For: 11y 3m 20d Posted 06/01/14 07:58 AM Share Posted 06/01/14 07:58 AM The gauges look good dude. Gotta get some for mine... Link to comment Share on other sites More sharing options...
XtRmn8 570Nm @1800rpm Donating Members 2,441 Member For: 21y 2m 10d Gender: Male Location: Perth, WA Posted 06/01/14 08:37 AM Share Posted 06/01/14 08:37 AM Gauges look awesome mate. Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 11d Gender: Male Location: Sydney Posted 06/01/14 08:43 AM Share Posted 06/01/14 08:43 AM Motor terminal.... :( Pulling it out now. Pics will come Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now