Jump to content

What Did You Do To Your Car Today?


Henz

Recommended Posts

  • Donating Members
  • Member For: 14y 3m 1d

Changed a few bushes, may have finally got rid of my dreaded knock but wanna drive around a bit more yet. Also created another problem in that something's catching on the front disc as it goes round making a scratching noise, will check that out 2moro

Also removed mudflaps. Rear bumpers probably gonna sprayed with stones now, more incentive to buy new wheels with higher rear offset.

N found out my wheels are definitely +38 offset. Gives me something to work with in wheel shopping cause +38 with 4sl but camber corrected doesn't work. Everyone who is really low in the rear has to be running more than -1deg camber (didnt correct after lowering) to fit a 275 tyre

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 3m 28d
  • Gender: Male
  • Location: Perth

activated :ninja: mode while Wifey and Jnr had a nap and snuck out to wire in my Axxess ASWC-1 so my steering wheel controls now operate the Pioneer deck I have in the car.

Whilst I had the crimpers out I rewired my E-boost/Wideband/Tachdriver power supply so the relay is switched by the power supply to the surge tank Pump. Now if by chance I loose power to the surge pump My E-boost will shut off (giving me no more than wastegate pressure) and my Wideband gauge will shut down so I'l know pretty quickly whats gone on.

  • Like 1
Link to comment
Share on other sites

  • ...JD TUNING ADELAIDE...
  • Gold Donating Members
  • Member For: 16y 7m 20d
  • Gender: Male
  • Location: Adelaide

Nice stuff luke

About time modules are available for aftermarket decks to accept steering controls

Is it like alpines first thingo that had to be mounted by the interior light ?

Oh piks ??

Link to comment
Share on other sites

  • Manual mode ________________________ All day, erryday
  • Donating Members
  • Member For: 17y 1m 27d
  • Gender: Male
  • Location: Probably above atmospheric pressure

Seems like a simple enough solution to an old problem, just needed a deck (with a remote input) that was designed with the Falcon in mind? Or can it work with any car's wheel controls (assuming same wiring)

Link to comment
Share on other sites

  • Moar Powar Babeh
  • Lifetime Members
  • Member For: 19y 3m 28d
  • Gender: Male
  • Location: Perth

It will work with any deck that takes the industry standard remotes. The list of cars it will work with is in the 100's mostly american stuff but works fine with the failcoon once programmed correctly

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'