ms700 Moderating Team 10,170 Member For: 21y 10m 10d Gender: Male Location: Sydney Posted 02/11/12 05:45 AM Share Posted 02/11/12 05:45 AM who's jetsnot?is that j@? Link to comment Share on other sites More sharing options...
senna_T Forged Member Lifetime Members 15,818 Member For: 17y 10m 4d Gender: Male Location: SW Sydney Posted 02/11/12 05:46 AM Share Posted 02/11/12 05:46 AM It's just a standard one mate, nothing too flash. 90 clams through trade discount at Rocket Industries - they are around 100 plus freight on fleabay Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 10d Gender: Male Location: Adelaide Posted 02/11/12 05:49 AM Share Posted 02/11/12 05:49 AM j@ is a gun jetsnot is a huge ohmo 2 Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 4m 21d Gender: Not Telling Posted 02/11/12 06:11 AM Share Posted 02/11/12 06:11 AM After all the catch can euphoria I got myself one. Calibre Supercheap item. Took out bottom bolt and used a screwdriver to push the top off (after taking all allenkey bolts out). Then proceeded to grind away internal inlet region so that I could get some piping around the inlet bolt. So as to make for a better unit air/oil separator, took about an hour. 2 stainless scourers fitted. I got a polished item (all they had). After a run I was surprised how hot it actually got. So thermodynamically speaking a black one would have been better. Im now think that I will run my rocker breather (front) into it via a barbed Y connector and vent all to atmo. As I was very surprised by the heat generated. Having that hot vapour feeding straight into the inlet manifold is not good for power. So I do think that this is a very worthwhile mod, with multiple benefits. Cheers Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 19d Gender: Male Location: Sydney Posted 02/11/12 07:15 AM Share Posted 02/11/12 07:15 AM (edited) Got any pics mate?Does much oil go into the can? Edited 02/11/12 07:17 AM by Kroozin Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 4m 21d Gender: Not Telling Posted 02/11/12 07:32 AM Share Posted 02/11/12 07:32 AM Got any pics mate?Does much oil go into the can?No sorry no pics. Only new so to early to say. But I will say this; due to the high temps I have little doubt that most of the oil content would probably still end up in the intake. Ideally a heat exchanger would benefit the system (located before catch can entry point, for best results). In the meantime I going to put a $3 fuel filter in the line (before catch can) and see if that helps by 1. slowing the flow, 2. providing greater surface area for cooling. But I honestly believe that if vented to atmo you would see BIG benefits.Cheers Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 7m 19d Gender: Male Location: Sydney Posted 02/11/12 07:35 AM Share Posted 02/11/12 07:35 AM Ok so for the slow folk like me its just the 2 hoses from the rocker cover going into a catch can and one hose from the catch can going somewhere out of sight with a filter? No 1 way valves or anything needed now coz its not connected to the inlet manifold anymore, right? Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 4m Gender: Male Posted 02/11/12 08:06 AM Share Posted 02/11/12 08:06 AM All done, just needs a intake cover. Booked in for touch up tune on Wednesday then straight to the drags at wsid.... Any guess what difference the plenum will make? Link to comment Share on other sites More sharing options...
KeddyXR6T Donating Members 320 Member For: 15y 9m 4d Gender: Male Location: Melbourne Posted 02/11/12 08:11 AM Share Posted 02/11/12 08:11 AM Let us know what difference the plenum makes I'm going to try a snort 1000 plenum what type have you fitted there Link to comment Share on other sites More sharing options...
Impellor Member 835 Member For: 14y 4m 21d Gender: Not Telling Posted 02/11/12 08:13 AM Share Posted 02/11/12 08:13 AM Ok so for the slow folk like me its just the 2 hoses from the rocker cover going into a catch can and one hose from the catch can going somewhere out of sight with a filter? No 1 way valves or anything needed now coz its not connected to the inlet manifold anymore, right?Your all over it !!!! You will need a 10mm Y barbed fitting ($4.60 ebay). Join both PCV and rocker breather (using Y connector) to the catchcan inlet. Then run the piping from outlet down to a hidden location. But make sure you use a small breather filter on the end to be certain that it does'nt becomed blocked by little creatures, mud, dirt etc. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now