601Turbz Member 111 Member For: 14y 6m 2d Gender: Male Posted 27/06/12 01:01 PM Author Share Posted 27/06/12 01:01 PM What about the actuator? I have no idea as to getting an 8 or 10 pound. I assume I would have to run atleast 12psi to obtain around 330rwkw. Link to comment Share on other sites More sharing options...
Wenier Donating Members 1,736 Member For: 15y 1m 19d Gender: Male Location: Christchurch, New Zealand Posted 27/06/12 08:48 PM Share Posted 27/06/12 08:48 PM Dont know about the boost youll have to run, but the actuator is a good idea to make sure it maintains the boost and doesnt allow it to bleed away. I reckon the 10 would be good. Link to comment Share on other sites More sharing options...
MX Dave Donating Members 545 Member For: 13y 11m 4d Gender: Male Posted 27/06/12 10:37 PM Share Posted 27/06/12 10:37 PM What about the actuator? I have no idea as to getting an 8 or 10 pound. I assume I would have to run atleast 12psi to obtain around 330rwkw.Ring your tuner mate they all prefere different actuators.Yours may need waste gate port aswell so don't get too carried away. 1 Link to comment Share on other sites More sharing options...
601Turbz Member 111 Member For: 14y 6m 2d Gender: Male Posted 28/06/12 03:48 AM Author Share Posted 28/06/12 03:48 AM Thanks guys, tuner reckons 8lb is the way to go. No porting needed with low 300's. I live in SA so Heinrich Perfromance will be my tuner Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,331 Member For: 19y 5m 14d Gender: Male Location: Perth Posted 28/06/12 04:39 AM Share Posted 28/06/12 04:39 AM Yeah/Nah we aren't doing the SA vs the World crap again fella's.Posted deleted/ 2 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 9m 10d Gender: Male Location: @ my laptop Posted 28/06/12 06:39 AM Share Posted 28/06/12 06:39 AM Thanks guys, tuner reckons 8lb is the way to go. No porting needed with low 300's. I live in SA so Heinrich Perfromance will be my tunerdepends on what exhaust you end up using and what boost you want to control Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 14y 1m 19d Gender: Male Location: Auckland, New Zealand Posted 28/06/12 06:53 AM Share Posted 28/06/12 06:53 AM (edited) But I am unsure whether to get 8psi or 10psi actuator. Is the Walbro GSS340 pump enough? Flows 255LPH.Probably a 12.8psi actuator would be better at that power to help avoid any boost control issues unless you are going to run a low boost tune also. I have seen set-ups with the boost solenoid by-passed that run perfect boost every time just below the actuator rating.I prefer an electronic boost controller if using actuators that are well under my desired boost or if a valet mode is required (I'm using VCM).+1 for the surge tank, leave the in-tank unmolested Edited 28/06/12 06:55 AM by riptide 1 Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 9m 6d Gender: Male Location: Adelaide Posted 28/06/12 09:49 AM Share Posted 28/06/12 09:49 AM (edited) the 7psi actuators bruce fits are perfict for the way he controls boost in under 350 rwkw carsralphy it is s.a vs the worldwe have road salmon down here aswell taking on the world one tune at a timep.s no surge should be fitted without up grading the intank its asking for issues if your going to fork out to begin with Edited 28/06/12 09:50 AM by JETSNOT 1 Link to comment Share on other sites More sharing options...
601Turbz Member 111 Member For: 14y 6m 2d Gender: Male Posted 28/06/12 02:49 PM Author Share Posted 28/06/12 02:49 PM the 7psi actuators bruce fits are perfict for the way he controls boost in under 350 rwkw carsralphy it is s.a vs the worldwe have road salmon down here aswell taking on the world one tune at a timep.s no surge should be fitted without up grading the intank its asking for issues if your going to fork out to begin withSounds good Jet, I'm just getting the upgraded fuel pump setup that Bruce supplies/fits. Link to comment Share on other sites More sharing options...
Panda Eyes flame magnet Gold Donating Members 5,674 Member For: 16y 9m 21d Gender: Male Location: adelaide hills- 'race air' central Posted 28/06/12 10:21 PM Share Posted 28/06/12 10:21 PM I use f6 valve springs with no issues... but I dont bounce off the limiter either... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now