Shyfrd Turboless Donating Members 5,992 Member For: 13y 9m 27d Gender: Male Location: Geelong, Victoria Posted 01/07/12 01:20 AM Share Posted 01/07/12 01:20 AM Good stuff mate, now the fun begins putting it into the g6 Link to comment Share on other sites More sharing options...
apolloxbgt Donating Members 109 Member For: 15y 10m 20d Gender: Male Posted 01/07/12 01:29 AM Author Share Posted 01/07/12 01:29 AM Next up the G6 was pulled in over the hoist,and the real work began.First thing done was the g6e leather went in (ebay score) so it didn't get damaged sitting around.I didn't have the wiring for the memory recall electrics for the drivers seat,so the xr6 seat and the g6e seat were stripped down to bare frames and the g6e foam and leather were fitted to the xr6 seat frame.Nothings ever easy.Then the motor and box were pulled from the g6,once it's all up and running with the turbo engine I'll ebay the n/a engine and the zf to recoup some of the cost of the turbo wreck (and the left over interior and diff and dash etc etc).Then the engine bay loom had to be changed,then in with the turbo motor and tremec.It's now sitting with the motor and box bolted in the hole,day off today but monday it will be full attack to get everything bolted back onto the engine and in the bay.It still needs the pedal box changing,exhaust and diff underneath.Lots to be done. Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 4m 27d Gender: Male Posted 01/07/12 01:50 AM Share Posted 01/07/12 01:50 AM Great progress! Link to comment Share on other sites More sharing options...
PookeyMaster Donating Members 1,531 Member For: 14y 5d Gender: Male Location: Parramatta, NSW Posted 02/07/12 12:27 AM Share Posted 02/07/12 12:27 AM Whats the blue and red mats hanging off the side of the front? Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 1d Gender: Male Location: Perth Posted 02/07/12 12:42 AM Share Posted 02/07/12 12:42 AM Fender protectors, stops dropped tools, belts etc etc scratching the paint work.Looking good mate, great progress! Link to comment Share on other sites More sharing options...
PookeyMaster Donating Members 1,531 Member For: 14y 5d Gender: Male Location: Parramatta, NSW Posted 02/07/12 12:52 AM Share Posted 02/07/12 12:52 AM Thanks Ralphie Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 5m 22d Gender: Male Location: NOR, Western Australia Posted 02/07/12 01:04 AM Share Posted 02/07/12 01:04 AM This is an awesome project. And moving quite quick with it too Link to comment Share on other sites More sharing options...
Pazzo Donating Members 11,132 Member For: 14y 2m 2d Gender: Male Posted 02/07/12 01:13 AM Share Posted 02/07/12 01:13 AM Yeah this would have to be the quickest moving build in a while. You are not mucking sround are you, well done. Cannot wait to see it finished. Link to comment Share on other sites More sharing options...
tuono Member 312 Member For: 14y 1m 11d Posted 02/07/12 01:25 AM Share Posted 02/07/12 01:25 AM Hang on, someone taking on a huge project and actually doing it. Amazing. You dont fark around. Id cry if I had to do that..................cause Im sh*t.Whats the blue and red mats hanging off the side of the front?Really? 2 Link to comment Share on other sites More sharing options...
apolloxbgt Donating Members 109 Member For: 15y 10m 20d Gender: Male Posted 02/07/12 11:58 AM Author Share Posted 02/07/12 11:58 AM It's moving along,almost everything is back in the bay and done underneath.Only really the pedal box and rear half of the loom still need to be done tomorrow,it's booked into the local ford dealer for Wednesday to get the parameters reset so it will run,then Wednesday arvo my arse is booked into the drivers seat to rip some skids. Whats the blue and red mats hanging off the side of the front?I put those little blankets on so it wouldn't get too cold when I left it alone at night. 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now