Jump to content

My Stock G6 To Manual Turbo Build.


apolloxbgt

Recommended Posts

  • Donating Members
  • Member For: 15y 10m 10d
  • Gender: Male

Ok so my car is not a g6e,and will have an xr6t driveline so I wasn't really sure where to put this.Given it looks more like g6et I thought in here would be the go.Has anyone been silly enough to convert a g series to manual yet,or am I the first?

About 8 months ago I started out with a stock lightning strike silver 2010 G6 with a zf,tech pack and curtain airbags,ex govt from the auctions.

First thing I did when I got it was dump it,fit g6et 19's and a g6et rear lip spoiler,the spoiler and wheels were here before the car turned up.

I drove it around for a couple of months,then stuck a v8 bonnet on it.

It looks like this right now:

IMG-20120112-00340_exposure.jpg

IMG-20120112-00333_exposure.jpg

Not long after buying an n/a FG I realised I wanted a boosted one,but I already had this one looking how I wanted it too (well except for getting it a bit lower),so I decided to buy a doner car and swap the running gear.

The plan is to get the stock driveline in the car and running,drive it for a month or 2 and give it a good shakedown,then start to up the power.

Enter fg #2:

I bought this rolled 2010 fg xr6 manual from the auctions:

IMG-20120608-00825.jpg

Today the build began by starting to strip the xr of it's turbo'd manual'd goodness:

IMG-20120621-00841.jpg

IMG-20120621-00840.jpg

At the end of the first day the engine is about ready to drop out,by lunch time tomorrow the whole lot will be out on the ground.

The aim is to try and have the silver car in at ford by mid next week to get it flashed,whats the odds that blows out LOL.

Edited by Dagabond
Title Changed.
  • Like 1
Link to comment
Share on other sites

  • Spooling Member
  • Donating Members
  • Member For: 13y 7d
  • Gender: Male
  • Location: Blue Mountains, NSW

Kudos for going ahead with what could be a much more expensive and time consuming procedure than selling and buying another.

Very interested to see how it goes.

Out of interest, what did the written off xr set you back?

Link to comment
Share on other sites

  • Tampon inserted, Auto Acquired, next purchase a new handbag
  • Donating Members
  • Member For: 16y 8m 23d
  • Gender: Male
  • Location: Vic

Whatever he paid he will probably get back if he parts what he doesn't use out.

Do all the work yourself and it's not to expensive an exercise.

Link to comment
Share on other sites

  • Donating Members
  • Member For: 15y 10m 10d
  • Gender: Male

Kudos for going ahead with what could be a much more expensive and time consuming procedure than selling and buying another.

Very interested to see how it goes.

Out of interest, what did the written off xr set you back?

I own both cars outright,so the expense doesnt worry me,and last time I checked there wern't any manual g series turbo's for sale at any price.

This particular wreck was worth somewhere near the cost of a new tremec.

Very interesting! You will need to swap looms over too... Hopefully no damage to the xr loom

Yeah,so we discovered today,the loom is fine thankfully.

I was going to rape the dash for the premium sound and black dash spears anyway,looks like it may be the whole dash.

It's not the first falcon I've done a dash in,I converted this stock xh to a V8 5 speed years ago:

xhute000113.jpg

xhute000234.jpg

I've built quite a few old falcons over the years too:

convosonvan.jpg

IMGP0277-1.jpg

IMGP0309.jpg

IMGP0708.jpg

DSC00175.jpg

22112010325.jpg

19022011564.jpg

So yeah,I like the old ones mostly,this is the first new car I've built.

hey buds do you have a hoist in your garage?? that is bloody awesome..

I have a hoist I can use for things like this,I'm building a new shed that will have one at home.

congrats on taking it on, what are you going to do about rego, insurance etc, going to get it engineered etc?

I've spoken to vicroads,the engine is an option in this body so no engineers is required,Insurance I havent sussed yet but it's in the wifes name so it shouldnt be too hard.I (she) have a couple of cars with shannons,I'll try them first.

  • Like 4
Link to comment
Share on other sites

  • Skid Machine
  • Donating Members
  • Member For: 13y 6m 19d
  • Gender: Male

Awesome project mate and what a great price for the wreck. I reckon you've done quite well to find a wreck at that price and you'll most definitely make some cash back from the left overs.

Love your list of cars too. Especially the last one :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'