bluedragon Member 77 Member For: 14y 1m 6d Gender: Male Location: Melbourne Posted 07/06/12 05:09 AM Share Posted 07/06/12 05:09 AM Hi , I have an Auto 04 Ba Xr6T with 160k and premium brakes. Rotors were machined about 10-15k ago and shudder has returned . I have Pbr Calipers and slotted rotors to match . Its $100 to remachine them but they will be underspec at 29.5 ish mm , falling just shy of the 30mm legal mark. Other option is $900 for new slotted rotors and new pads. I have by tomoz to give an answer but im not sure what to do. Anyone have any sugguestions ? Is there a foolproof way to fix this annoying brake shudder or a rotor that is shudder prrof ? shudder is annoying me ! im aware this is a well debated topic, I read 4 pages and everyone seems to disagree ... Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 13y 10m 10d Gender: Male Location: Auckland, New Zealand Posted 07/06/12 05:13 AM Share Posted 07/06/12 05:13 AM Are your bushes ok and not causing the shudder? What diameter are the brake disks? 1 Link to comment Share on other sites More sharing options...
bluedragon Member 77 Member For: 14y 1m 6d Gender: Male Location: Melbourne Posted 07/06/12 05:18 AM Author Share Posted 07/06/12 05:18 AM yep bushes are all fine - everything under car is good - im not sure re diameter, car is at mechanics atm , some idea in pic Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 13y 10m 10d Gender: Male Location: Auckland, New Zealand Posted 07/06/12 05:26 AM Share Posted 07/06/12 05:26 AM Just asking about the diameter because I've never had trouble with mine and they're nothing special but mine's a BF2 and I think they got over the problem by going to a 322 diameter or something like that.The only time I've managed to get it to shudder is on hard brakes at the end of the drag strip and once on the road when I missed my turn off Link to comment Share on other sites More sharing options...
Mr_4.0 Member 1,096 Member For: 13y 10m 8d Posted 07/06/12 05:33 AM Share Posted 07/06/12 05:33 AM I have the pbr upgrades and never had an issue. Don't know many that have. I'd be checking front end bushes etc. If you buy new rotors, you can get way cheaper than 900 bucks to suit Link to comment Share on other sites More sharing options...
bluedragon Member 77 Member For: 14y 1m 6d Gender: Male Location: Melbourne Posted 07/06/12 05:33 AM Author Share Posted 07/06/12 05:33 AM haha.. what gets me is I basically only use this car to just drive to work and back. Malvern to Altona 5 days a week . Im not hard on the brakes and the shudder is still present . Wonder if I can upgrade the diameter . Link to comment Share on other sites More sharing options...
bluedragon Member 77 Member For: 14y 1m 6d Gender: Male Location: Melbourne Posted 07/06/12 05:35 AM Author Share Posted 07/06/12 05:35 AM $900 was my quote inc cleaning , labour , new rotors and pads up front. If anyone can point me in the direction/link of a good deal , would be appreciated. I dont even know where to start and tomoz is my deadline . Link to comment Share on other sites More sharing options...
Bellato Donating Members 2,713 Member For: 14y 1m 8d Posted 07/06/12 06:02 AM Share Posted 07/06/12 06:02 AM (edited) For just fronts that's not cheap. Can get DBA4000's for $330 on ebay plus pads ($150?) and do the install yourself? http://www.ebay.com....#ht_1452wt_1168Also only going off what I'v ever seen or heard but is there are chance that the hub wasn't cleaned properly before your current discs were put on. Apparently the slightest bit of crap on there can put the disc off slightly and yea you'll get shudder way too soon. Someone can probably clarify this because like I said, just going off what I've read. Edited 07/06/12 06:03 AM by Bellato 1 Link to comment Share on other sites More sharing options...
STIFLR Donating Members 572 Member For: 15y 11m 19d Gender: Male Location: Victoria Posted 07/06/12 06:27 AM Share Posted 07/06/12 06:27 AM I had the PBR brakes on my old BA and the rotor sizes were 325x32 F, 303x16 RCost me $1400 to replaced all four corners with DBA T3's and Bendix SRT pads (parts only) did the install myself. Link to comment Share on other sites More sharing options...
bluedragon Member 77 Member For: 14y 1m 6d Gender: Male Location: Melbourne Posted 07/06/12 06:31 AM Author Share Posted 07/06/12 06:31 AM pretty sure the hub was cleaned . thanks for that link. theres so many cheap rotors on ebay for an xr6t my heads in a spin. I found these , they look okay too .http://www.ebay.com.au/itm/504-CURVED-SLOTTED-ROTORS-FRONT-FORD-BA-XR6-XR8-XR6T-/140764577177?pt=AU_Car_Parts_Accessories&hash=item20c638fd99 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now