boosted_rhino* Donating Members 26 Member For: 12y 8m 6d Gender: Male Location: melbourne s/e suburbs Posted 28/06/12 02:26 AM Share Posted 28/06/12 02:26 AM thanks for the info guyspualie I wouldnt mind loosing low end much in favour of top endim sure they would have cams to be used with or without vct, like honda vtechs ? , I feel like I have a vtech engine now lolaslong as its not a step backwards im still set on getting one Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 1m 2d Gender: Male Location: SE Melbourne Posted 28/06/12 02:57 AM Share Posted 28/06/12 02:57 AM That meant to be "not really a factor"? Or it is right how it is? Lol :/haha woops, meant to be not really a factor. boosted_rhino, if you want to loose bottom end then get your tuner to tune it that way, they can make your car feel like its gutless down low, then you get pinned into your seat as the boost kicks in or you can have a linear power curve through the rev range. All this can be achieved using the stock cam set up. VCT was developed by Ford, it is different from vtech. No one is against cams here but you really don't need them. There will be zero benefit to your application. your rods will let go before you would even consider upgrading cams. 1 Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 27d Gender: Male Location: @ my laptop Posted 28/06/12 03:30 AM Share Posted 28/06/12 03:30 AM upgraded cams, head work etc will not make any difference while the turbo can only supply x amount of air. 1 Link to comment Share on other sites More sharing options...
jimbo111 New Member 10 Member For: 14y 1m Posted 28/06/12 04:26 AM Share Posted 28/06/12 04:26 AM Only new to the forum and dont post very often or at all. The proclaimed 400+kw fg with standard turbo was tuned by LG Automotive in Townsville. The person tuning the car, from what I've been told, is only new to tuning these vehicles. Ian from Aitkenvale Auto has told myself that he will be taking a look at the car to see what has actually been done to get such numbers and believes it is pretty much bs and well unsafe for the motor etc. I believe Ian knows exactly what he is talking about as I have heard nothing but good things from his workshop and he has never gone wrong by myself, always aiming for the most power and doing it safely. He will be carrying out the work on my own fg and I would like to push for as much power as I can out of the standard turbo. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 27d Gender: Male Location: @ my laptop Posted 28/06/12 06:40 AM Share Posted 28/06/12 06:40 AM Ian will look after you well 1 Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 1m 2d Gender: Male Location: SE Melbourne Posted 28/06/12 06:47 AM Share Posted 28/06/12 06:47 AM Only new to the forum and dont post very often or at all. The proclaimed 400+kw fg with standard turbo was tuned by LG Automotive in Townsville. The person tuning the car, from what I've been told, is only new to tuning these vehicles. Ian from Aitkenvale Auto has told myself that he will be taking a look at the car to see what has actually been done to get such numbers and believes it is pretty much bs and well unsafe for the motor etc. I believe Ian knows exactly what he is talking about as I have heard nothing but good things from his workshop and he has never gone wrong by myself, always aiming for the most power and doing it safely. He will be carrying out the work on my own fg and I would like to push for as much power as I can out of the standard turbo.So you have the fg that was tuned by LG? sorry didn't really understand the post. Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 10d Gender: Male Posted 28/06/12 07:29 AM Share Posted 28/06/12 07:29 AM ye I know cams isnt needed, but I was thinking when the time comes for valve springs I might get a cam in there aswellthey sound nice plus reduces the amount of boost needed to make certain amount of power, from what ive seen crow cams show on youtubeI feel asif ppl are against cams around here loljust say for the sake of the scenario;im getting 360rwkw on e85 on max on my fg turboif I had a cam installed id get 360rwkw with less boostthen would I be able to put up the boost and go over 360rwkw barrier ? what boost r u runing mate.?? 1 Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m 13d Gender: Male Location: Sydney Posted 28/06/12 08:17 AM Share Posted 28/06/12 08:17 AM Would be around 20 lbs Mark to make 360 with the little turbo. Link to comment Share on other sites More sharing options...
Glouva1 Donating Members 654 Member For: 13y 5m 20d Gender: Male Location: Surrey Hills, Melbourne Posted 28/06/12 08:37 AM Share Posted 28/06/12 08:37 AM You don't need cams with small turbo or built engine. 314 on 98 netted me 11.29@122.78 and 359 on E85 netted me 11.005 at 122.78 not 122.13 as posted in FG top 25. Someone will eventually crack a 10 no doubt. Link to comment Share on other sites More sharing options...
Glouva1 Donating Members 654 Member For: 13y 5m 20d Gender: Male Location: Surrey Hills, Melbourne Posted 28/06/12 08:37 AM Share Posted 28/06/12 08:37 AM Sorry 126.78mph. Typo. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now