stormsearcher Donating Members 28 Member For: 13y 8m 14d Posted 13/05/12 11:22 AM Share Posted 13/05/12 11:22 AM I bought a monza on ebay.its a m spec.I installed transcooler PWR for the BA mK ii.the monza does not fit in the space esp on the drivers side. Should I trim the front bar? I thought it was a direct replacement.the brackets dont line up as well.anybody installed one before? Tips to make it fit please.thanks. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 17d Gender: Male Location: Far north queensland Posted 13/05/12 08:26 PM Share Posted 13/05/12 08:26 PM tips are get a grinder out and then make yourself some new brackets Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 5m 15d Gender: Male Posted 13/05/12 08:43 PM Share Posted 13/05/12 08:43 PM 2 new holes need to be drilled on passenger side, other than that should fit straight in Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 7m 19d Gender: Male Posted 13/05/12 10:33 PM Share Posted 13/05/12 10:33 PM Mine fitted in fine with a bit of persuading. No modifications necessary for me. Do a bit of a search as the question has been asked a couple of times before. Link to comment Share on other sites More sharing options...
stormsearcher Donating Members 28 Member For: 13y 8m 14d Posted 14/05/12 12:03 AM Author Share Posted 14/05/12 12:03 AM had a look this morning. transcooler is a bit to the driver's side. shortens the arc in the space.now its either relocate the transcooler 10mm to the centre or grind a bit of the front bar.anyideas where I can get those zipties that go thro the radiator supplied with the PWR kit?also I kinked the transmission oil line running to the radiator which now goes to the transcooler a little bit. was wondering if this is going to affect the oil flow is this line easy to replace? Link to comment Share on other sites More sharing options...
spinr33 Donating Members 964 Member For: 13y 4m 25d Posted 14/05/12 12:14 AM Share Posted 14/05/12 12:14 AM Try this for the zip tie things or if you have a good auto shop should stock them think like performance automotive shophttp://www.ebay.com.au/sch/I.html?_from=R40&_trksid=p3907.m570.l1313&_nkw=transmission+cooler+kit&_sacat=See-All-Categories Link to comment Share on other sites More sharing options...
KeddyXR6T Donating Members 320 Member For: 15y 10m 5d Gender: Male Location: Melbourne Posted 16/06/12 10:20 AM Share Posted 16/06/12 10:20 AM The original brackets don't center the cooler so ....get 2 bricks sit the cooler on them stacked and the cooler centered, get a 150mm longer 2.5 inch top intercooler hose that is on there from stock, the bottom hose will pull over with a little force and make some brackets that reach the original holes on the front bar support best to use some 25X3 flat bar for the brackets, (you can bend the 90s into them with a hammer and vice) 2 will be enough and you may need to bend a A/C hose that may get in the way of the bottom right corner.Stick the front bar back on beauty Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now