Most Power Made On Std Ba Pistons.

[Ace]

ah fair enuff - was always good seeing the small business making a big name in the sport - hope he finds a customer willing to have a crack soon - would be good to see a blueboosted falcon in the 8s

[turbowelshy89]

Ok I did some digging and I was way off dave only ran 430rwkw when he ran the stock motor to a 9.9 and this is what they picked up off the track when it let go

The miner emerges....

430??? Not even close from what he told me it was puttin close to 600kw or so and that was through a built btr. It only ever seen a dyno once while he had it and that was just to see what it would make the rest of the time it was tu.ed on the track. Head studs and valve springs were the only engine mods.

Sent from my HTC Velocity 4G using Tapatalk 2

[Kroozin]

18psi with gt42

is that danny's car your talking about, made like 480something rw?

I wonder if its the compression/boost that turns these motors into scrap metal or just the shear power they are making?

Edited 04/05/12 11:54 PM by Kroozin

[Bonjaz]

Well my car Held together for another night, I drove it to the track and back, full exhaust, slicks and front runners were put on at the track, I put race fuel in it when I got there, and let her rip,

she ran a 10.2 at 135 first pass

9.94 at 137.4 mph second run (1.43 60ft)

10.0 at 137.1 mph last run I creped on the line this run and set the light, so the 60ft was slower, but would have been a quicker run I beleive.

c4 auto, stock tail shaft, stock gears, stock diff(with after market CV's) best of all the motor is a 120000klm old BA motor that the last owner use to leave the oil changes for the next owner to do, but has ATOMIC valve springs in it.the car has some weight out of it, standed driver seat, no pas seat or back seat, but has got a 6point rollcage in it now, but still would be a bit lighter then stock I think.

sorry if I am going on a bit, but I am very proud of this.

David

Thanks guy's, it forums like this that make us push these harder, to find out limits, and to find faults with these cars, so we all go faster,

I will try to answer the questions,

the suspenion is stock all round (12000klm old) shocks are stock as well.

the car was putting out 427rkws it was having valve spring isues, I was going to take it to 450 as I had it at the dyno comp, but the valves would float and the lifters would pump up, so it would drop to about 4 cylinders for a few seconds, I should have spent some time machining the lifters so they can't pump up, but I was lazy, left everything to the last minute as usual and it had isues. (note to myself do thing properly next time)

for the best because I would have been kicked off for not having a paracute (my ultimate goal)

Mods; c4, 3000 stall, 60lb injectors, atomic valve springs, Process west stage 3 race kit (including the plenum, can't be to bad)

t51r turbo, 6boost exhaust manifold, 4inch exhaust, (By Mick Zamit racing) 10.5 inch X 28 slicks with front runers, 8inch rims, no pas seat no back seat,some other little things out because I have not put then back in yet since the cage has been done. fuel tank in the boot now, 19.5 psi boost. race fuel c16(never used that before, she is good sh-t)!!!! Dominator convertor,

A speical mention to Northern Beaches Auto electrics, they donated the turbo and manifold, for the car, just because of there pasion for these cars, not for advertisement, so anyone in Mackay and suroundings, when you need some auto work done (including fitting of intercoolers and other mechenical, go to someone that loves these cars, owns these cars, I am not just talking about them, I am talking about all around Australia, if they don't own one of these cars, there behind the 8 ball to start with.

will do a leak down and comp test on the motor, and see if she is still sweet and then I will decide weather to punish it a bit more, stock motor kicked off for not having a paracute has a nice ring to it.

David

I never asked him many questions about it so im just going on what I read??? He kept refering to 19.5psi and around the 440kw, read through the thread "A Stock Internal Ba Xr6t Motor Can Run A Nine"

[Bonjaz]

The power was around 540rkws, just foot and handbrake,she fries the tyres with that only imagine what would happen if I hit the transbrake.

David

this was when he had the built motor in and ran a 9.4 and earlier in the thread he talked about taking it close to 600kw next time but I dont think he ever got a next time, pretty sure he sold it soon after...

[Paulie2256]

is that danny's car your talking about, made like 480something rw?

I wonder if its the compression/boost that turns these motors into scrap metal or just the shear power they are making?

yep.

too much timing kills them.

[Stazza_Brendan]

Theres a list of his mods and shows one of the quick passes on stock motor.

There was a dyno day where he reeled off 600hp on the stock bottom end. None of the vids of that dyno show the power though.