fletty Member 191 Member For: 12y 9m 22d Gender: Male Posted 27/04/12 11:09 PM Share Posted 27/04/12 11:09 PM Pretty simple noob question really, Are both these style of intakes going to help my get the most out of my smaller fg turbo?I will be aiming for a 310-325 rwkw with a strong low to mid gain, not overly fussed on top end peak power as I don't drive on the street at peak rpm all the time. Will the Turbo side spool up faster?Plazmaman Factory SidePlazmaman 4" Turbo SideAlso does the factory side intake, still give you the turbo spool that you get from the turbo side intakes? I have searched through a heap of youtube videos but cant seem to find one with the same set-up. Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 13y 11m 21d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 28/04/12 12:09 AM Share Posted 28/04/12 12:09 AM For that power either will do. Dre had the passenger side and got some noise from it. But if you want real jet spool noise go the turbo side. But remember your up for a battery replacement also. Its gettin a bit $$$ if your doin it just for noise. If your hearts not just set on plazmaman maybe try ebay *wink* Link to comment Share on other sites More sharing options...
Shyfrd Turboless Donating Members 5,992 Member For: 13y 9m 20d Gender: Male Location: Geelong, Victoria Posted 28/04/12 12:16 AM Share Posted 28/04/12 12:16 AM (edited) ...... http://www.ebay.com....t-/261006885118 Edited 28/04/12 12:17 AM by Shyfrd Link to comment Share on other sites More sharing options...
Jake F6 Donating Members 327 Member For: 21y 5m 4d Location: Melbourne Posted 28/04/12 12:21 AM Share Posted 28/04/12 12:21 AM Where does the Plazmaman suck it's air from given that there is no snorkel? It would appear that it is getting hot under bonnet air... Link to comment Share on other sites More sharing options...
PLAYRZ Donating Members 333 Member For: 19y 10m 11d Gender: Male Location: VIC Posted 28/04/12 12:59 AM Share Posted 28/04/12 12:59 AM I'd also consider KPM's new intake ($595) or perhaps Herrods soon to be released intake (price???). 1 Link to comment Share on other sites More sharing options...
freeze_dk I am dissatisfied with my current employment situation Donating Members 8,610 Member For: 18y 2m 20d Gender: Male Posted 28/04/12 01:55 AM Share Posted 28/04/12 01:55 AM Nice bit of gear the KPM kit but for 600$ you can get a stinless intake and battery relocation Link to comment Share on other sites More sharing options...
fletty Member 191 Member For: 12y 9m 22d Gender: Male Posted 28/04/12 05:32 AM Author Share Posted 28/04/12 05:32 AM For that power either will do. Dre had the passenger side and got some noise from it. But if you want real jet spool noise go the turbo side. But remember your up for a battery replacement also. Its gettin a bit $$$ if your doin it just for noise. If your hearts not just set on plazmaman maybe try ebay *wink*Yea I think for the extra money I could spend now it will save upgrading later on. What extra is needed to finish your kit? Extension cables for power? Or are these supplied? Link to comment Share on other sites More sharing options...
james333 Member 91 Member For: 13y 10m 3d Gender: Not Telling Posted 28/04/12 10:51 AM Share Posted 28/04/12 10:51 AM I have tested a fg v8 box with a inches of water gauge.(showed 27 which is restrictive @ 309rwkw)it showed that there was no restriction from the 3inch rubber flexi hose or the v8 air box.the restriction was the crossover.so changing the filter set up after the crossover, I would go with the v8 box because it has the best flow of cold air and still has the stock look.(if that's what you want)@ 309rwkw going from a v8 air box to a 4inch turbo side intake should pick up an extra 8rwkw.but hey, this is what I found on my car. Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 6m 21d Gender: Male Location: @ my laptop Posted 28/04/12 10:56 AM Share Posted 28/04/12 10:56 AM pretty much what I have seen on my dyno 1 Link to comment Share on other sites More sharing options...
Slymeat Team Kickass Donating Members 1,926 Member For: 20y 10m 20d Gender: Male Location: Albion Park, NSW Posted 28/04/12 10:29 PM Share Posted 28/04/12 10:29 PM I cant see the intake anywhere on their websie. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now