NickBA-XR6T Bronze Donating Members 386 Member For: 12y 10m 26d Posted 27/04/12 02:01 AM Share Posted 27/04/12 02:01 AM Anybody have any idea how much the part costs and where the best place to get it from is around Sydney? If anybody knows some rough prices and places to go it would be great. Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 9m 16d Gender: Male Location: Sydney Posted 27/04/12 02:08 AM Share Posted 27/04/12 02:08 AM 150bux from bursonsBut you'll need to get your tail shaft rebalanced which can be from 250 to 450bux Link to comment Share on other sites More sharing options...
NickBA-XR6T Bronze Donating Members 386 Member For: 12y 10m 26d Posted 27/04/12 04:03 AM Author Share Posted 27/04/12 04:03 AM Ok, so not too bad then. I had a look on Hardy Spicers website, they sell 2 different centre bearings for BA falcons, one is a 35mm for cars with a midship uni joint and one 30mm for cars with a midship CV joint. I assume the one I need is the uni joint one? Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 21d Gender: Male Posted 27/04/12 04:49 AM Share Posted 27/04/12 04:49 AM Ok, so not too bad then. I had a look on Hardy Spicers website, they sell 2 different centre bearings for BA falcons, one is a 35mm for cars with a midship uni joint and one 30mm for cars with a midship CV joint. I assume the one I need is the uni joint one?Bob Drive Shaft in Granville quoted me $880 for a new ZF rubber coupling, new centre bearing and rear tailshaft cv.Drive in drive out. Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 9m 16d Gender: Male Location: Sydney Posted 27/04/12 02:02 PM Share Posted 27/04/12 02:02 PM I had to look under the car to see what mine was with the car half up on the gutter to see it properly but yeh mine had a uni-joint in the middle but its worth checking it out for your own sake.. ya dont wanna buy the wrong one, would be a pita.that's a pretty good price rednose considering you got the rear tailshaft cv replaced too.. would of thought the cv would have been relatively Exxy..Ford were charging something like 300bux just for the centre bearing bush alone when I went to Powerford at castle hill. Link to comment Share on other sites More sharing options...
rednose RNS10S Donating Members 2,229 Member For: 18y 5m 21d Gender: Male Posted 27/04/12 02:39 PM Share Posted 27/04/12 02:39 PM I had to look under the car to see what mine was with the car half up on the gutter to see it properly but yeh mine had a uni-joint in the middle but its worth checking it out for your own sake.. ya dont wanna buy the wrong one, would be a pita.that's a pretty good price rednose considering you got the rear tailshaft cv replaced too.. would of thought the cv would have been relatively Exxy..Ford were charging something like 300bux just for the centre bearing bush alone when I went to Powerford at castle hill. Going in on Monday, not sure if it needs the rear cv, if it doesn't then it will be $550 Link to comment Share on other sites More sharing options...
NickBA-XR6T Bronze Donating Members 386 Member For: 12y 10m 26d Posted 29/04/12 10:03 PM Author Share Posted 29/04/12 10:03 PM Sweet, have used Bob Drive Shaft before for a 300ZX they were good value. I'll go see them this week. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now