xeghia82 Member 54 Member For: 13y 2m 6d Gender: Male Location: Melbourne, South Eastern Suburbs Posted 23/04/12 03:40 AM Author Share Posted 23/04/12 03:40 AM You'd think that they would beef this section up since the BA models. 10 years on since the BA was released and there is still diff issues.Im doing the job tonight. will let you all know how I go. Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,331 Member For: 19y 5m 19d Gender: Male Location: Perth Posted 23/04/12 03:44 AM Share Posted 23/04/12 03:44 AM Simon from XFT here in WA has been fully welding and plating cradles in some of his bigger HP builds for quite a few years now. Link to comment Share on other sites More sharing options...
wa g6et Member 657 Member For: 13y 9m 11d Gender: Male Location: Perth NOR Posted 23/04/12 04:25 AM Share Posted 23/04/12 04:25 AM (edited) That makes good sense on high hp cars but the need to on a stock car? Edited 23/04/12 04:27 AM by Ralph Wiggum quote removed Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,331 Member For: 19y 5m 19d Gender: Male Location: Perth Posted 23/04/12 04:30 AM Share Posted 23/04/12 04:30 AM OP doesn't mentioned if the cars tuned, I would say no, but if the OP's car is stock and has had this failure I could be wrong! Link to comment Share on other sites More sharing options...
Guest XR09 Guests Posted 23/04/12 08:55 AM Share Posted 23/04/12 08:55 AM The white shoite is lithium based grease. And you do need it or the poly's groan like a biatch Link to comment Share on other sites More sharing options...
hypnodoc It's All In Your Mind Gold Donating Members 2,198 Member For: 21y 4m 13d Gender: Male Location: Melbourne Posted 23/04/12 01:15 PM Share Posted 23/04/12 01:15 PM The potential of these cars let down by some basic design issues like these cradles and bushes. I love my G6E Turbo but I worry about possible future issues like this, especially now I've modified and probably have no warranty on the cradle.Crap bushes, crap suspension, crap cradles, crap build quality, crap diff howl, all for 10 years, and over 60k for an fpv with all the same self destructing xt rubbish underneath. Ford don't give a toss, then they wonder why its getting harder to sell their cars. Shame Polites R.I.P left Ford. 2 Link to comment Share on other sites More sharing options...
Guest XR09 Guests Posted 24/04/12 04:39 AM Share Posted 24/04/12 04:39 AM Guess it shows how much Ford put into R&DAnd then wonder why the dealers have such a bad attitude.Shoite starts at the top. And smears all the way down. Link to comment Share on other sites More sharing options...
xeghia82 Member 54 Member For: 13y 2m 6d Gender: Male Location: Melbourne, South Eastern Suburbs Posted 24/04/12 05:10 AM Author Share Posted 24/04/12 05:10 AM Fixed it last night guys. Feels so much better while driving now. No more clunking or anything. Will post some pics up later tonight. 1 Link to comment Share on other sites More sharing options...
Jake F6 Donating Members 327 Member For: 21y 8m Location: Melbourne Posted 28/04/12 01:42 PM Share Posted 28/04/12 01:42 PM Ok, so I had the car at a suspension place whilst checking to determine where some of my rear end squeaks were coming from, and to my horror I was shown that my diff case was also cracked, just like the others!Now, the bloke welded the crack up, but didn't strengthen the casing by welding any plate onto the back of the casing, as he reckons he would need to remove the rear diff bush to prevent it from melting... The rear diff bush looks ok.My question is, will this be sufficient? Can I weld on an additional plate without melting the rear diff bush? Where do I take the car for this type of work?This is really a concern, as I don't drive the car very hard, however it does have 327rwkw, and I think that I would strongly suggest that anyone with an FG pushing more than 300rwkw should proactively go and get this weak component strengthened. Link to comment Share on other sites More sharing options...
Kroozin Menace Donating Members 1,990 Member For: 13y 10m 20d Gender: Male Location: Sydney Posted 28/04/12 02:32 PM Share Posted 28/04/12 02:32 PM Are there any pics of these being welded up with extra plating for strength? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now