Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 4m 13d Gender: Male Location: NOR, Western Australia Posted 09/02/13 11:12 AM Share Posted 09/02/13 11:12 AM It's not too dark at 5:30am you'd be suprised, but never want to be starting anything on the weekend before 7! Link to comment Share on other sites More sharing options...
Skylarkz Member 97 Member For: 12y 2m 1d Gender: Male Location: Perth Posted 09/02/13 11:36 AM Share Posted 09/02/13 11:36 AM sorry to see you having trouble Steve. Hope all goes well putting her together. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 09/02/13 01:26 PM Share Posted 09/02/13 01:26 PM Cheers dude. It's not difficult work per se, just fiddly and annoying when you don't have much room or a hoist! Back kills me leaning over the engine bay for an hour when I do TB clean/torque turbo and manifold bolts. Working in wheel wells is almost as bad, plus there's things to watch out for like falling brakes calipers and dangers from heavy objects like the car, hahaha. I use stands of course, never under there with jack only, that's asking for paraplegia (at best). Link to comment Share on other sites More sharing options...
Skylarkz Member 97 Member For: 12y 2m 1d Gender: Male Location: Perth Posted 09/02/13 01:39 PM Share Posted 09/02/13 01:39 PM Had mine up on a hoist at a mates house last weekend. 1 Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 3m 5d Gender: Male Posted 09/02/13 01:43 PM Share Posted 09/02/13 01:43 PM ^ WTF!BURN IT! Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 09/02/13 01:57 PM Share Posted 09/02/13 01:57 PM (edited) Dude we have the same mods Edited 09/02/13 02:00 PM by -SteveR- 1 Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 11d Gender: Male Location: Perth SOR Posted 09/02/13 02:42 PM Share Posted 09/02/13 02:42 PM Okay guys, this is still on as I'm still gunna be here if anyone needs workshop space and a hand do to whatever they need.But without Luke and Steve, we will be short on turbo specific knowledge.We can do it again in a month or so but if anyone turns up tomorrow, they'll still be welcome to do whatever they need to do and use my tools and workshop.It'll be hot but there'll be plenty to drink and eat. 2 Link to comment Share on other sites More sharing options...
Grug Member 1,318 Member For: 16y 3m 17d Posted 09/02/13 08:23 PM Share Posted 09/02/13 08:23 PM Dam, sucks about Steve and Luke, just realised I had tomorrow night off so I could have attended I can't really think of anything that needs done to my car, unless anyone can treat the rust on my rear quarter panel then respray it Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 10/02/13 01:08 AM Share Posted 10/02/13 01:08 AM (edited) Got rust converter Phil? Grug you can buy touch up paint from Ford hahaha.Phil's Panel and PaintNo big loss without me there I only know the basics man and even then I make things harder for myself than I need to (not removing fans to do belt/pulley change). Or problems I have encountered on my own big km car like wheel bearings.PS so much for being up early. Better go get started... Edited 10/02/13 01:09 AM by -SteveR- Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 11d Gender: Male Location: Perth SOR Posted 10/02/13 01:20 PM Share Posted 10/02/13 01:20 PM Thanks to Masda74 and Woody for calling in today.Masda did some boost solenoid maintenance and cleaned his air filter and Wooody's FG2 ute came in handy to measure up for cutting my new dash mat to suit my ICC mounted gauges.I stead of being stinking hot, it was pretty comfortable in the garage with all the doors open and I had a great day.I also got to have a little drive of masda's manual T which was very nice.I'll make another attempt at putting one of these on and we'll get some more guys around. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now