discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 05/02/13 12:08 PM Share Posted 05/02/13 12:08 PM (edited) Remember to BYO filters and fluids for coolant etc.Maybe check relevant threads on forum if unsure of fluids to bring, like I'm about to do with coolant...I did a semi coolant change but didn't have enough concentrate I think so time to do it again!Here's one prepared earlier:Need 10L of premix or distilled water (plus mixers) all upIt turns yellow because:A: It's crap coolantB:The blocks are sand cast and 10000k's seems to be just about enoughtime to wash the residual sand particles out of the cooling system.Also +1 for Tectalloy 90+ for post mix or Castrol Radicool for Premixed Edited 05/02/13 12:41 PM by -SteveR- 1 Link to comment Share on other sites More sharing options...
Skylarkz Member 97 Member For: 12y 2m Gender: Male Location: Perth Posted 05/02/13 01:06 PM Share Posted 05/02/13 01:06 PM I'm NOR if pre cruise is still on. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 05/02/13 01:23 PM Share Posted 05/02/13 01:23 PM Only just getting it organised!Luke, pick a NOR meet point. Chop chop! Link to comment Share on other sites More sharing options...
masda74 To Loud Gold Donating Members 4,112 Member For: 12y 11m 15d Gender: Male Location: WA, Perth Posted 05/02/13 01:44 PM Share Posted 05/02/13 01:44 PM I would like to do my Earl inline oil filter. I am assuming that I will need to dump all my oil to do this job and then replace it with a fresh clean batch?Sound about right? Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 4m 13d Gender: Male Location: NOR, Western Australia Posted 05/02/13 02:13 PM Share Posted 05/02/13 02:13 PM Maybe someone can show how to do the trans cooler install too?I have a mate from work who wants to tag along to see this, and just to see some other T's in general - he's on the forums (orangexr6turbo I think his name is) Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 1m 23d Gender: Male Location: Perth Posted 05/02/13 10:27 PM Author Share Posted 05/02/13 10:27 PM I would like to do my Earl inline oil filter. I am assuming that I will need to dump all my oil to do this job and then replace it with a fresh clean batch?Sound about right?nah no need, you will only loose whats in the feed line to the turbo (ie 4/5 of f-all)Ciaran, trans cooler install is a 3-4hr job. Not really a basic maintenance task Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 4m 13d Gender: Male Location: NOR, Western Australia Posted 05/02/13 10:36 PM Share Posted 05/02/13 10:36 PM Ah no worries, was just an idea Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 06/02/13 06:12 AM Share Posted 06/02/13 06:12 AM Could go for a greasing of window winder motors inside the door perhaps, white lithium grease good for this? Also silicone for the rubbers? Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 16y 11m 22d Gender: Male Location: Probably above atmospheric pressure Posted 06/02/13 10:57 AM Share Posted 06/02/13 10:57 AM Repco have a sale on right now which is worth checking out for consumables.Also keen on power steering fluid change..lost my bottle somehow when I was going to do it last! Link to comment Share on other sites More sharing options...
Boganspeed Will do skids for food Silver Donating Members 1,177 Member For: 13y 11d Gender: Male Location: Perth SOR Posted 06/02/13 02:03 PM Share Posted 06/02/13 02:03 PM Righto !You should all have PM's now with my address and mobile number, if I've missed you, just pipe up here and I'll send you the details.If you aim to get to my place somewhere around 11 or 12, we'll try to wrap things up by five as I have another engagement.You can park on the lawn or the driveway if there's room.Notes.I have a couple of 20L containers for waste oil, it's free to dump at the local tip so I'm happy to look after that.Not sure what to do with used coolant, maybe the tip will take that too.I have compressed air, a trolley jack, two sets of stands and I reckon I have just about all the tools we'll need including a torque wrench if you need it.Someone pls bring a filter wrench because I don't have one.It's gunna be 39 degrees but we'll be in the garage out of the sun and I can open roller doors to get a breeze going and have a floor fan and even an air con vent in the garage that you can stand under.I'll supply soft drinks and plenty of ice and water.I'll also supply a basic barbie lunch.I have a carton of Coronas in the fridge that I will never finish so feel free but please be responsible.Finally... this is my house, I have nice toys, if you have any dodgy mates, don't bring them with you. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now