dastard1 Member 42 Member For: 12y 11m 8d Gender: Male Location: briz Posted 09/04/12 05:00 AM Author Share Posted 09/04/12 05:00 AM ok so I put them in with standard gap and no suprise it was no good , so gapped them down to .7mm and still no good , I checked the old ones that came out of it and they were gapped to .5mm , so I just ended up putting the old ones back in and im going to ask high torque to order me in some super six plugs already gapped and right heat etc , they are tunning it on thursday so mayaswel just have them put in the right plugs for me . Link to comment Share on other sites More sharing options...
xr6t_ute Donating Members 2,281 Member For: 17y 7m 28d Gender: Male Location: south east suburbs Posted 09/04/12 05:56 AM Share Posted 09/04/12 05:56 AM 0.5mm doesnt sound right to me Link to comment Share on other sites More sharing options...
dastard1 Member 42 Member For: 12y 11m 8d Gender: Male Location: briz Posted 09/04/12 06:51 AM Author Share Posted 09/04/12 06:51 AM a friend of mine had a blown vt commo and his were .3mm , yah I have no idea , .7 was no good for me at 16psi , will be interesting to see what power I get from high torque on 16psi , aparently the hp tunes are sh*t and they cant control boost , that's why my car had an eboost put in , so im hoping a flash tune will clean things up a bit and hoping to see 340rwkw Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 8m 26d Gender: Male Location: @ my laptop Posted 09/04/12 08:53 AM Share Posted 09/04/12 08:53 AM That gap is way too small and probably done to mask a coil problem!HP is not sh*t, but on some strategy's in early BA's there can be boost control issues, well that was what I was told after I purchased the software, they recommended buying a third party boost controller Link to comment Share on other sites More sharing options...
xr6t_ute Donating Members 2,281 Member For: 17y 7m 28d Gender: Male Location: south east suburbs Posted 09/04/12 12:52 PM Share Posted 09/04/12 12:52 PM Mine are gapped at .76 and running more boost than yours, if that can give you an idea. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 3m 27d Gender: Male Location: Far north queensland Posted 10/04/12 12:28 AM Share Posted 10/04/12 12:28 AM Jet might come across as a spanker but he knows his chit and was trying to help you and save you some troubles and coin.what gearbox do you have?you are cahsing a 40kw gain by changing from HP to SCT, what mods are you doing to support this?300rwkw and 16psi sounds like a lot of boost for the poweras others have saidWRX sec plugs have been used by a few people because they come with a smaller gap0.5mm gap is too smallstock BA xr6t plugs are 1.1mm Link to comment Share on other sites More sharing options...
Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 4m 30d Gender: Male Location: Perth Posted 10/04/12 02:18 AM Share Posted 10/04/12 02:18 AM Keep it civil and on topic or I will start handing out holidays. Link to comment Share on other sites More sharing options...
dastard1 Member 42 Member For: 12y 11m 8d Gender: Male Location: briz Posted 10/04/12 05:25 AM Author Share Posted 10/04/12 05:25 AM I dunno im just going off mods and power ratings ive seen on many other ba,s , the fella who owned this car was apparently a mechanic and im pretty sure all the mods were done by him and the tune etc, im thinking giving the car to a reputable tunner - workshop and just asking them to give it a good going over and a flash tune will be well worth the money and give me peace of mind that everything is as it should be , since I have had it I have replaced the oil and filter which was black, cleaned the pod with a recharge kit which was also black , and tried to change the plugs but as u know had a bit of trouble in that department , yah so the mechanic obviously didnt care for his car very well ,srtange though , the mods have all been done in the last year or so - there are recipts for the intercooler etc, and the gear box was fully rebuilt with biger servos and whatever there is a recipt for 6500$ on the rebuilt gearbox that's also only a year old . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now