bionic_oosty Donating Members 241 Member For: 13y 1m 27d Gender: Male Location: Sydney/Wollongong Posted 20/03/12 10:20 PM Share Posted 20/03/12 10:20 PM (edited) Hey all,So I have my BF (4/6/06 build) 6sp manual xr6 turbo at 'JEM' Performance getting it's first dyno tune. Now I know my car is sort of on the build period of when they received typhoon internals etc.My car is getting dynoed today and the tuner has told me he's only expecting 270-280rwkw because that's all the standard valve springs can handle.. I have read every possible google search relating to this and there seem to be people out there with BA models even with less mods getting closer or over 300rwkw??Surely the standard valve springs can get it to 300, otherwise this tune feels like a complete waste of time and money considering my car already feels like its got around 250rwkw easy just with my below mods!Thoughts??My car mods up until this tune are:*4" dump into 3" hi flow cat*Full Growler kit CAI*50% bigger intercooler*Walbro fuel pump*60 lb injectors*Brand new spark plugs*New turbo actuator* And full tank BP Ultimate just to top it offCheers, Josh. Edited 20/03/12 10:23 PM by bionic_oosty Link to comment Share on other sites More sharing options...
Boogtonic Member 76 Member For: 13y 5m 16d Gender: Male Location: Brisbane Posted 20/03/12 10:32 PM Share Posted 20/03/12 10:32 PM My car had a few similar mods and it's first untuned run on the Dyno was 250rwkw with boost cut at 5000rpm, RDP tuned it all in and finished up with 282rwkw and trust me the difference is night and day, it's not just the final figure that matters its where and how it makes the power. Besides running those mods without a tune is asking for trouble Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 11m 21d Gender: Male Location: Vic Posted 20/03/12 10:40 PM Share Posted 20/03/12 10:40 PM Your bf valve springs should be fine unless you have done high km's. Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 9m 17d Gender: Male Posted 20/03/12 10:42 PM Share Posted 20/03/12 10:42 PM You probably could get up to 300rwkw with those mods but I doubt it would be too safe. As your tuner said, 270-280. You never really know with the factory valve springs. You'll basically have to wait till it's on the dyno but I'd rather just pay for one tune so I did them before just in case. Link to comment Share on other sites More sharing options...
bionic_oosty Donating Members 241 Member For: 13y 1m 27d Gender: Male Location: Sydney/Wollongong Posted 20/03/12 10:51 PM Author Share Posted 20/03/12 10:51 PM Yeh I think I've found that out the expensive way haha..Ah well, I guess I'll just see how it feels and (naturally) when I want more power I'll put some stronger springs in. I'll post up what it gets this arvo. I'm still hopeful of a nice suprise when they call me!Thanks guys Link to comment Share on other sites More sharing options...
rbjet Skid Machine Donating Members 1,640 Member For: 13y 9m 17d Gender: Male Posted 20/03/12 11:04 PM Share Posted 20/03/12 11:04 PM If the springs are the limiting factor of the tune then just wait till you get more parts down the track and do another round mods.You won't be disappointed with a custom tune. Much nicer to drive and a lot more midrange generally too. Link to comment Share on other sites More sharing options...
discostig Manual mode ________________________ All day, erryday Donating Members 13,798 Member For: 17y 3m 16d Gender: Male Location: Probably above atmospheric pressure Posted 21/03/12 04:52 AM Share Posted 21/03/12 04:52 AM Also remember dyno figures are not directly comparable, there are big variances sometimes with same car on different rollers. The "best" way is mph trap speed at the 1/4 from all I've read. Link to comment Share on other sites More sharing options...
bionic_oosty Donating Members 241 Member For: 13y 1m 27d Gender: Male Location: Sydney/Wollongong Posted 21/03/12 06:34 AM Author Share Posted 21/03/12 06:34 AM yeah true mate,I took it to WSID last wednesday so I'd have a 'before & after' 1/4 time. But all 200 spots were full just after 6:30pm.. Tuner shafted me today and now it's dyno run is pushed back until tomorrow. Nothing worse than waiting!! Link to comment Share on other sites More sharing options...
Ciaran Thooperrrrrrr Donating Members 2,768 Member For: 13y 8m 10d Gender: Male Location: NOR, Western Australia Posted 21/03/12 06:47 AM Share Posted 21/03/12 06:47 AM I have an 06/06 BF and got 271.9rwkw's just from injectors and an F6 snorkel. I dont think the springs were going to be much of an issue yet, but won't really know until I push for some more down the track. Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 11m 21d Gender: Male Location: Vic Posted 21/03/12 07:35 AM Share Posted 21/03/12 07:35 AM I made 360 stock springs. But now they're floating. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now