Jump to content

Herrod Cai


Recommended Posts

  • Bronze Donating Members
  • Member For: 12y 9m 16d
  • Gender: Male
  • Location: Brisbane

Hey guys Ive been looking to start doing some basic upgrades to to my T and figred the air box is a good place to start. I know alot of people prefer the phoon lower snorkel or some thing like APS or Highflow's CAI but I was wondering if anyone had the herrod one and if so what is your opinion of it?

This is the one im asking about. http://www.herrodmotorsport.com.au/HerrodPerformanceProducts/EngineComponents/BABFColdAirInductionKit/tabid/248/Default.aspx

Cheers Chris

Link to comment
Share on other sites

  • Skid Machine
  • Donating Members
  • Member For: 13y 5m 29d
  • Gender: Male

I'm not too sure what there worth but you can do a bit better for your money. It is a great bit of gear but the f6 lower snorkel would do the same job for 1/4 of the price.

Link to comment
Share on other sites

  • Bronze Donating Members
  • Member For: 12y 9m 16d
  • Gender: Male
  • Location: Brisbane

I have to admit that a big part of the appeal towards the Herrod one is the looks. The APS and Highflow are pretty much a larger aftermarket F6 lower snorkel and for $90. After all how often do you drive with the bonnet up :drivingalong:

Link to comment
Share on other sites

  • Three pedals are better then two..
  • Donating Members
  • Member For: 17y 5m 27d
  • Gender: Male
  • Location: Melbourne

Stainless doesn't have one that uses the stock cross over as it's a waste of time.

Link to comment
Share on other sites

  • Skid Machine
  • Donating Members
  • Member For: 13y 5m 29d
  • Gender: Male

If you plan on going further with your mods then you're better off just ripping out all the standard stuff and just putting a full cooler and intake kit on.

Link to comment
Share on other sites

  • Member
  • Member For: 14y 4m 2d
  • Gender: Not Telling

If your a little handy with a grinder you could make your own. I have included 2 pics that might help.. In one there is a pic of the snorkel that was trimmed back to follow the line of the bonnet mounted rubber seal. The other is some 150mm diameter aluminium ducting. This was pushed into an oval shape and pulled out to fit into open area below the headlight. Cuts were made to allow it to fit through aircon piping. Food for thought. Cheers

Intake012.jpg

Intake011.jpg

Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 2m 25d
  • Gender: Male

I agree turbo side is the best, however what if you get canaried? 1 intake mod right so intercooler + turbo or passenger side pod breaks that? I wanted to go turbo side but the other day I got pulled up talking on the phone while driving, the cop took one look at my gauges (my car is stock looking) and asked to pop the bonnet...couldnt see anything and that was it...now turbo side if the cop is slightly in the know would pick this up..

anyone have this problem?

PS the herrod one look like the 'autotechnica' ones from fleabay/autobarn which go for about 280

Edited by JGP
  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'