Jump to content

Nitto Invos


THCOOK

Recommended Posts

  • Member
  • Member For: 12y 10m 7d
Thanks mate I'll get in touch with them and see what they can do.
It's dodgy but as I said inquire about them sending the two lots separately. Worse case it would cost two wire transfer fees. I'd assume shipping is the same as they send bundles of two. The import tax applies if the cost is more than 1000 not counting the price of shipment..

Sent from my Galaxy S2 using crapatalk

Link to comment
Share on other sites

  • Menace
  • Donating Members
  • Member For: 13y 7m 9d
  • Gender: Male
  • Location: Sydney

You will not find a tyre that grips as well as the invo in that price range.

Jescam, you will struggle to find a tyre that will contain your power.

I have 400rwkw and around 370 with the e boost off which is how I drive it on the street, the Invos will not hold 2nd gear but do well with 3rd unless the tyres or road is very cold.

For grip on the street I beleive the Invos are great.

The NT05 is grippier but may need more time to get up to temp which may not be possible depending on how long your on the road for.

275's will be much better than the 245's you have now but are still not enough in my opinion which is why I am looking at moving to a 305.

There's no point having 500rwkw if you cant put it to the ground so get the widest wheels and tyres you can fit.

George.

Hey George,

What wheels and offsets will you be running on the rear for the 305's?

Link to comment
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 16y 4m 8d
  • Gender: Male
  • Location: Victoria

Try and ship to two addresses... If they come through customs at the same time, they'll realize you are trying to dodge tax!!!

  • Like 1
Link to comment
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 18y 3m 15d
  • Gender: Male

Hey George,

What wheels and offsets will you be running on the rear for the 305's?

Don't know, after some advice from the wheel guys on this forum.

Which offset should I be looking for to fit 19 x 10.5 on the rear of a Bf2?

Wanting to put 305/30/19 on the rear

  • Like 1
Link to comment
Share on other sites

  • Member
  • Member For: 15y 10m 10d
  • Gender: Male
  • Location: Melbourne

Try and ship to two addresses... If they come through customs at the same time, they'll realize you are trying to dodge tax!!!

Thanks for the heads up mate, didn't think of that lol.

Link to comment
Share on other sites

  • Menace
  • Donating Members
  • Member For: 13y 7m 9d
  • Gender: Male
  • Location: Sydney

If looking at running 10's... whats band of offsets would the BA-BF need to stay inbetween if running 19's and the car is 320-325mm hub to guard on the ass end?

I see alot of ppl just going 9.5's with a 275.. Why is this?

Edited by Kroozin
Link to comment
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 16y 4m 8d
  • Gender: Male
  • Location: Victoria

If you ran +40 it would work... With a 10 inch rim...

If you go wider than 295 it will scrub... I've ran 295/25/20 on mine with +38 offset and 10 inch rim. No scrubbing. Perfect

  • Like 1
Link to comment
Share on other sites

  • RNS10S
  • Donating Members
  • Member For: 18y 3m 15d
  • Gender: Male

If you ran +40 it would work... With a 10 inch rim...

If you go wider than 295 it will scrub... I've ran 295/25/20 on mine with +38 offset and 10 inch rim. No scrubbing. Perfect

Andrew, what is the widest rim and tyre combo that would fit on the rear of a BF2, don't mind rolling and pumping the guards.

I currently have your old Hiros and haven't even rolled the guards, is there no way a 10.5 inch with 305 will fit?

George

Link to comment
Share on other sites

  • A much better forum
  • Silver Donating Members
  • Member For: 16y 4m 8d
  • Gender: Male
  • Location: Victoria

It will fit... but your diff needs to be centered (mines off to right)... and you need to look at the tyre brand...

Some tyres are much wider than others in a 305... Nittos have a round shoulder, so they usually dont scrub.

20x10.5 +30 and 305/25/20 will fit will rolled and slightly pumped gaurds...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'