bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 6m 10d Gender: Male Posted 12/02/12 09:43 AM Share Posted 12/02/12 09:43 AM Yeh man it got me to where im at now but its time to upgrade especially with the heat in brizzy atm it sucks... Link to comment Share on other sites More sharing options...
Finnyman Member 28 Member For: 15y 10m 13d Posted 12/02/12 10:03 AM Author Share Posted 12/02/12 10:03 AM yeh see I wanted reliabilty and safe from the word go so I went for a good cooler which set back my time of the tune and injectors a month or two :( I wish I had got joes advice as I would have got a full exhaust then tune and I would have been happy not to do anymore to the car... nar im feeling like I missing an essential mod as not knowing the factory exhaust is restrictive in a close loop tune. I would have liked to get more power with still a safe tune and is my own fault for thinking most stuff I read on forums is just how it is lol... never heard of close loop and open loop tunes so hey... something I have learnt... but still impressed of how ot drive on the roadhows it feel with 300rwkw, hows your torque figure and curve mate? Link to comment Share on other sites More sharing options...
bionicxr6t05 Bronze Donating Members 2,216 Member For: 13y 6m 10d Gender: Male Posted 12/02/12 10:45 AM Share Posted 12/02/12 10:45 AM On a nice cool day it loves lighting the rears rollin on in 2nd 630nm torque but we wont get into dyno torque reading debates lol Dyno sheet is in my topic in this section Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 6m 14d Gender: Male Location: Victoria Posted 12/02/12 11:43 AM Share Posted 12/02/12 11:43 AM Sounds like a load of sh*t to me...Mick @ PitLane tuned mine with 15psi and a stock twin 2 & 1/4 exhaust with high flow cat... 350rwkw...Pretty sure he tunes in closed loop...Of course, mine had ported waste gate and 12psi actuator...I'm still lost as to him saying the stock actuator will hold 15 psi easily? Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 9m 11d Gender: Male Location: Victoria Posted 12/02/12 11:47 AM Share Posted 12/02/12 11:47 AM It can. Just not high in the rpm range. That's why the boost curve on cars with a stock actuator starts to fall off at higher rpm. Link to comment Share on other sites More sharing options...
Finnyman Member 28 Member For: 15y 10m 13d Posted 13/02/12 02:41 AM Author Share Posted 13/02/12 02:41 AM can sound whatever you want worm because the car feels fast.. and im making my torque than some people with well over 300rwkw running more boost so the pulling power is more than there... as I said ill see the mph and time at the drags... cheers everyone for the comments Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 10m 17d Gender: Male Location: Vic Posted 13/02/12 04:34 AM Share Posted 13/02/12 04:34 AM (edited) Yea your car will run 10.8@129 for sure.Dyno torque is always 100% correct. Edited 13/02/12 04:41 AM by Henz Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 6m 14d Gender: Male Location: Victoria Posted 13/02/12 04:38 AM Share Posted 13/02/12 04:38 AM It can. Just not high in the rpm range. That's why the boost curve on cars with a stock actuator starts to fall off at higher rpm.Hence why I said "hold" boost.... Link to comment Share on other sites More sharing options...
Finnyman Member 28 Member For: 15y 10m 13d Posted 13/02/12 06:05 AM Author Share Posted 13/02/12 06:05 AM Yea your car will run 10.8@129 for sure.Dyno torque is always 100% correct.yeh because the rwkw on the same dyno run shows low and the torque high... makes sense :S Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 6m 14d Gender: Male Location: Victoria Posted 13/02/12 07:41 AM Share Posted 13/02/12 07:41 AM LOL Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now