bunna Donating Members 813 Member For: 18y 4m 13d Posted 10/02/12 03:23 AM Share Posted 10/02/12 03:23 AM The choice is simple:If you don't like the idea of having to hack away at a brand new car, you'd like your front crumple zone to perform as designed, and you prefer your airbags to deploy as intended, then the PWR is as far as you can go.If not, choosing anything else (Nizpro, PW, Plazmaman) means you have to get your hack on.Anyone who says a PW cooler can be fitted without cutting is wrong. 2 Link to comment Share on other sites More sharing options...
TRA1NR Pitlane Member Donating Members 2,886 Member For: 17y 8m 6d Gender: Male Location: Pakenham, Victoria Posted 10/02/12 03:27 AM Share Posted 10/02/12 03:27 AM what about rapid? aparently you only need to shave the plastic shroud at the top of the bar? Link to comment Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 14y 10m 22d Gender: Male Location: Eastern Suburbs, Melbourne Posted 10/02/12 03:33 AM Share Posted 10/02/12 03:33 AM No metal cutting with the nizpro cooler, returned back to standard no problems Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 7m 11d Gender: Male Location: @ my laptop Posted 10/02/12 04:04 AM Share Posted 10/02/12 04:04 AM KV your main reinforcement bar was cut on your car, this is what Bunna was talking about. Link to comment Share on other sites More sharing options...
Kv! Donating Members 1,132 Member For: 14y 10m 22d Gender: Male Location: Eastern Suburbs, Melbourne Posted 10/02/12 04:13 AM Share Posted 10/02/12 04:13 AM Oh right ! Link to comment Share on other sites More sharing options...
ratter Member 6,793 Member For: 18y 7m 11d Gender: Male Location: @ my laptop Posted 10/02/12 04:20 AM Share Posted 10/02/12 04:20 AM many people think because it is plastic that it can't be structural, they think it needs to be metal Link to comment Share on other sites More sharing options...
JGP Donating Members 309 Member For: 14y 4m 10d Gender: Male Posted 10/02/12 04:40 AM Share Posted 10/02/12 04:40 AM check out plazmaman stage 1 kit little bit of trimming that can be done with a die grinder and they're good for 400+rwkw they look awesome as well I have one on my B series no cutting was required...the website claims 360+rwkw but the measurements are 470x350x90. not sure how it would handle that power level. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m 12d Gender: Male Location: Far north queensland Posted 10/02/12 04:49 AM Share Posted 10/02/12 04:49 AM B series a lot different mate, more room at the front for coolers, plus its one piece of metal in front of them. Link to comment Share on other sites More sharing options...
Sydneyxr6t Member 63 Member For: 13y 2m 5d Gender: Male Location: Sydney Posted 02/03/12 08:33 PM Author Share Posted 02/03/12 08:33 PM OKHad my PWR stepped I/C fitted yesterday and retune done, the I/C looks great from the front, I opted for the shiny one:)Results were an increase in power from 294.5rwkw to 325rwkw at 15psiRaining in Sydney so I wont have a chance to really road test the car for a few dayscheersArmando 1 Link to comment Share on other sites More sharing options...
STAINLESS again plz You've changed man.... Donating Members 8,142 Member For: 14y 11d Gender: Male Location: 2 Fuchsia Court, Narre Warren. 3805 Posted 02/03/12 09:45 PM Share Posted 02/03/12 09:45 PM Nice one Was gunna say the pwr will fit your herrod pipes, hdi probably needed a new piping kit also. So more $$$. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now