ripped6 Donating Members 246 Member For: 13y 4m 24d Gender: Male Posted 27/01/12 12:16 PM Share Posted 27/01/12 12:16 PM Hi guys, just posting to say I cracked 400 last week in my FG XR6T. It ran 17psi and on 98 to achieve this figure.It also has had the Nizpro stage 3 kit fitted, for those that don't know it consists of:Nizpro FMICNizpro injectorsNizpro 4in exhaustNizpro 3in FMIC pipingF6 turboSS inductions CAIX-cal 3It also has 6 spot brembo brakes and 20in tyres with 275's on the rearVery near future plans are for a nizpro tailshaft, turbo side intake and a surge tank plus re-tuneI've attached my dyno sheet and a photo of the engine bay (though its not a very good photo) Link to comment Share on other sites More sharing options...
RynoF6 Idiot Member Donating Members 446 Member For: 14y 11m 4d Gender: Male Location: Muswellbrook, NSW Posted 27/01/12 12:27 PM Share Posted 27/01/12 12:27 PM (edited) Nice work. Any plans to run it down the quarter? Edited 27/01/12 12:28 PM by RynoF6 Link to comment Share on other sites More sharing options...
Bomber Carnage on the Garage Floor Donating Members 3,994 Member For: 14y 7m 14d Gender: Male Location: Gold Coast Posted 27/01/12 12:28 PM Share Posted 27/01/12 12:28 PM Awesome mate.Even made that power with a Growler hey Dillz Link to comment Share on other sites More sharing options...
possum Donating Members 553 Member For: 15y 7m 2d Gender: Male Posted 27/01/12 12:36 PM Share Posted 27/01/12 12:36 PM Are you still running the standard turbo? it doesn't really look like nizpro I/c piping? Link to comment Share on other sites More sharing options...
ripped6 Donating Members 246 Member For: 13y 4m 24d Gender: Male Posted 27/01/12 09:02 PM Author Share Posted 27/01/12 09:02 PM (edited) I wouldn't mind taking it down the quarter as a power figure means very little if the car can't back it up. Just need to get the last few parts on before I give it a run. Its running the gt35r turbo and all the parts were supplied and fitted by Nizpro aside from the SS inductions cold air. Edited 27/01/12 09:06 PM by ripped6 Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 7m Gender: Male Location: Melbourne Posted 27/01/12 09:41 PM Share Posted 27/01/12 09:41 PM Like the nizpro stage 3 piping, looks good.Awesome mate.Even made that power with a Growler hey Dillz SA mate, doesn't count.. Lol Link to comment Share on other sites More sharing options...
f6mark Member 2,908 Member For: 13y 10m 11d Gender: Male Posted 27/01/12 09:41 PM Share Posted 27/01/12 09:41 PM nice mate.. good to see a another nice hi powered fg turbo in the club.. Link to comment Share on other sites More sharing options...
ripped6 Donating Members 246 Member For: 13y 4m 24d Gender: Male Posted 27/01/12 11:27 PM Author Share Posted 27/01/12 11:27 PM Guess I'll have to stick it on a Victorian dyno and see how it goes Dillz... a quarter mile time is what I really want though, no one can question that result, though might be more difficult being manual. Cheers F6mark, its good to be classed as a high powered FG. Link to comment Share on other sites More sharing options...
sexual harrassment panda I see a red door and I want to paint it black Donating Members 5,919 Member For: 15y 2m Gender: Male Location: Far north queensland Posted 28/01/12 12:00 AM Share Posted 28/01/12 12:00 AM nice effort mate - 400rwkw manual would be fun Link to comment Share on other sites More sharing options...
Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 7m Gender: Male Location: Melbourne Posted 28/01/12 12:03 AM Share Posted 28/01/12 12:03 AM Guess I'll have to stick it on a Victorian dyno and see how it goes Dillz... a quarter mile time is what I really want though, no one can question that result, though might be more difficult being manual. Cheers F6mark, its good to be classed as a high powered FG.Yeah dyno numbers aren't really that impressive anymore, slips are. What time you thinking? Maybe mid low 11's? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now