BA55Y Member 74 Member For: 14y 9m 2d Posted 13/01/12 04:49 AM Share Posted 13/01/12 04:49 AM I was wondering how much offset is pushing it to far on a falcon?For example would 19x9 with +26 offset be to much pressure on the fronts?Or as long as the hub fitting is right so wheel studs aren't taking load and the correct seating wheel nuts are used should there be no problems? Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 9d Gender: Male Location: Vic Posted 13/01/12 05:47 AM Share Posted 13/01/12 05:47 AM 9.5+12 front, 10.5 +15 rear is pushing out the guards. Wait, my brothers run 8" -25 before. Link to comment Share on other sites More sharing options...
ScatterBrain Donating Members 316 Member For: 15y 5m 28d Gender: Male Location: Brisbane Posted 13/01/12 08:14 AM Share Posted 13/01/12 08:14 AM 19x9 +26 will be fine. My race circuit wheels are 18x9.5 +30 on the front and I've never had any wheel bearing/stud problems. Link to comment Share on other sites More sharing options...
Emosh99 Member 260 Member For: 13y 11m 10d Gender: Male Location: Melb Posted 15/01/12 08:19 PM Share Posted 15/01/12 08:19 PM im thinking 18x9.5 +15 dori tecks....im guessing they need a lil guard work...they come in gold but im thinking paint em white, blue or red... Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 9d Gender: Male Location: Vic Posted 16/01/12 08:50 AM Share Posted 16/01/12 08:50 AM Rolled rears depending on height. Wait not with your 4wd. Link to comment Share on other sites More sharing options...
1600dave Donating Members 872 Member For: 13y 10m 20d Posted 17/01/12 01:43 AM Share Posted 17/01/12 01:43 AM Will 19x8 +20 be ok on the front, either a 235/35 or 245/35?Currently have same size in +40 but don't like how far they sit inside the guard, but fear +20 might hit the stock guards??Have the lowered GT HD springs so its not super low or anything.I've read in 20's a 20x8.5 +35 is about as far as you can go on stock guards, meaning the rim will only sit 3.7mm further out than the 20. Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 6d Gender: Male Location: Victoria Posted 17/01/12 02:13 AM Share Posted 17/01/12 02:13 AM I ran 20x9 with +20 and rolled fronts and they still hit... But my car is farkin low...And they would have been 1/2 inch further out...I reckon they'd be fine but may have to roll if low... Link to comment Share on other sites More sharing options...
Scar92 Member 52 Member For: 13y 6m 19d Gender: Male Posted 17/01/12 09:40 AM Share Posted 17/01/12 09:40 AM 19 x 9 + 26 wont cause any issues, what sort of look are you going for? coz this fitment wont be very aggressive Link to comment Share on other sites More sharing options...
Worm A much better forum Silver Donating Members 3,808 Member For: 16y 4m 6d Gender: Male Location: Victoria Posted 17/01/12 10:24 AM Share Posted 17/01/12 10:24 AM It'll be just inside the guards... Couple of mm Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 8m 9d Gender: Male Location: Vic Posted 17/01/12 11:13 AM Share Posted 17/01/12 11:13 AM (edited) What tyres did you have On worm, that would be what caused you grief! Stretch FTW. Edited 17/01/12 11:14 AM by Henz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now