eff xr6t Member 569 Member For: 11y 2m 24d Posted 17/05/18 09:12 AM Share Posted 17/05/18 09:12 AM I left the converter bolted up to the flex plate when I did this.This was where you went wrong. Allways unbolt the convertor because they never line up back in the pump easily even if you pull it straight out and push back in. Lucky you sorted it anyway 1 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,983 Member For: 9y 10m 24d Gender: Male Location: South Australia Posted 17/05/18 09:16 AM Share Posted 17/05/18 09:16 AM Good advice there. I haven't had issues with fitting mine but clearly there can be some. Link to comment Share on other sites More sharing options...
woz84 Member 33 Member For: 11y 1m 26d Gender: Male Posted 18/05/18 02:03 AM Share Posted 18/05/18 02:03 AM 16 hours ago, eff xr6t said: This was where you went wrong. Allways unbolt the convertor because they never line up back in the pump easily even if you pull it straight out and push back in. Lucky you sorted it anyway Yea I've always done it the proper way over the years on various cars but this is the first time the loom got caught in such a BS position and it just got me frustrated so I took a shortcut and we all know how those end up. All good, live and learn Link to comment Share on other sites More sharing options...
XR6Twannabe Member 21 Member For: 11y 11m 18d Posted 31/05/18 10:02 AM Share Posted 31/05/18 10:02 AM I just got my BF XR6 Turbo ZF6 auto back from a tune, making about 360rwkws, but already I've noticed a couple of times under full load that it's failed to change from 2nd to 3rd and got to about 6,000rpm before it hit rev limiter and just cut all power... I see a lot of people talking about their ZF6 slipping, but I think this is different? I'm thinking the ZF6 is in need of a service? Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 31/05/18 11:53 AM Share Posted 31/05/18 11:53 AM How many ks the car down? Gearbox ever been serviced? Link to comment Share on other sites More sharing options...
XR6Twannabe Member 21 Member For: 11y 11m 18d Posted 31/05/18 11:29 PM Share Posted 31/05/18 11:29 PM just over 100,000kms... I don't believe the gearbox has ever been serviced... maybe I should get one anyway? the car was first tuned about 5 years ago, and then more recently just a few days ago... one thing I've noticed since the tune a few days ago is that the car drives and changes gears a lot smoother... it feels like the gearbox was more aggressive with the previous tune.. I don't know if this could have anything to do with it? Link to comment Share on other sites More sharing options...
woz84 Member 33 Member For: 11y 1m 26d Gender: Male Posted 01/06/18 05:51 AM Share Posted 01/06/18 05:51 AM Get the tuner to turn the torque reduction back on 1 Link to comment Share on other sites More sharing options...
XR6Twannabe Member 21 Member For: 11y 11m 18d Posted 02/06/18 06:39 AM Share Posted 02/06/18 06:39 AM ahh I think it’s flaring/slipping too. in manual mode, was in 3rd and at about 4,000rpm I changed to 4th. went into 4th and the revs actually went up a little then back to around 4,000rpm. Link to comment Share on other sites More sharing options...
woz84 Member 33 Member For: 11y 1m 26d Gender: Male Posted 02/06/18 10:33 AM Share Posted 02/06/18 10:33 AM (edited) Yea like I said, sounds like the torque reduction has been turned off. Regardless, being at 100,000 km, you should service the trans anyway. It's not that big a job that people make it out to be. Edited 02/06/18 10:34 AM by woz84 1 Link to comment Share on other sites More sharing options...
Hammo1 New Member 1 Member For: 5y 7m 12d Posted 12/05/19 12:29 AM Share Posted 12/05/19 12:29 AM Hello guys new to the zf6 gearbox just have an enquiry just picked up an 06 xr6 bf with a zf6 and when I brake then go to take off if feels like a car has hit me from behind when it goes to change gear if that makes sence also this morning there was a bit of lag from when I put the accelerator down to when it actually decided to change gear could need a service just thought id get opnions thank you Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now