Ralph Wiggum Moar Powar Babeh Lifetime Members 19,323 Member For: 19y 3m 1d Gender: Male Location: Perth Posted 01/12/14 01:33 AM Share Posted 01/12/14 01:33 AM Thats the shifter cable mate,.Probably best to leave it as is. 1 Link to comment Share on other sites More sharing options...
GeorgeGhia New Member 9 Member For: 8y 9m 28d Posted 22/05/16 01:29 PM Share Posted 22/05/16 01:29 PM On 31 December 2011 at 8:28 PM, Dillz said: Rebuilding the ZF http://www.fordxr6turbo.com/forum/topic/34989-rebuilding-zfs/ Cost to Rebuild the ZF http://www.fordxr6turbo.com/forum/topic/76772-cost-of-a-built-zf/ ZF Fluid http://www.fordxr6turbo.com/forum/topic/75173-zf-fluid/ ZF Tune http://www.fordxr6turbo.com/forum/topic/76929-zf-flashed/ http://www.fordxr6turbo.com/forum/topic/77783-zf-6-speed-tune/ http://www.fordxr6turbo.com/forum/topic/76461-zf-tuning/ http://www.fordxr6turbo.com/forum/topic/58219-zf-tuning/ ZF Service http://www.fordxr6turbo.com/forum/topic/76845-zf-serviced/ The Dreaded 'ZF Milkshake' http://www.fordxr6turbo.com/forum/topic/75623-zf-auto-milkshake/ ZF Heat Exchanger Replacement and External Transmission Coolers http://www.fordxr6turbo.com/forum/topic/72459-zf-heat-exchanger-replacement/ http://www.fordxr6turbo.com/forum/topic/75827-replacing-heat-exchangerscooler-bypass-for-zf-xr6t/ http://www.fordxr6turbo.com/forum/topic/75645-fg-zf-external-cooler/ Billet Flex Plates for ZF http://www.fordxr6turbo.com/forum/topic/74955-billet-flexplate-for-zf-autos/ ZF Issues http://www.fordxr6turbo.com/forum/topic/72978-zf-issues-anyone-hadgot-these/ Service areas Brisbane http://www.fordxr6turbo.com/forum/topic/73632-zf-gearbox-servicing-in-brisbane-area/ http://www.fordxr6turbo.com/forum/topic/76187-who-servicesrebuilds-zfs-in-brisbane/ Melbourne http://www.fordxr6turbo.com/forum/topic/74742-zf-servicing-melb/ http://www.fordxr6turbo.com/forum/topic/76012-zf-servicing-melbourne/ If I've missed any important threads can you please post a link in here and I'll add it to this post. Cheers. http://www.fordforums.com.au/showthread.php?t=11441275 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 18/03/17 08:26 AM Share Posted 18/03/17 08:26 AM Seen a 6R80 input shaft in the flesh today. Why would you bother with anything else. Nizpro can keep their shafts. Gold by the Kg is probably cheaper............. 1 Link to comment Share on other sites More sharing options...
OZYWALKER XR50T Gold Donating Members 2,795 Member For: 11y 7m 23d Gender: Male Location: Western Sydney Posted 18/03/17 08:45 AM Share Posted 18/03/17 08:45 AM Lol bout time Arron. Link to comment Share on other sites More sharing options...
skidxr6t skids Donating Members 2,754 Member For: 11y 11m 26d Gender: Not Telling Posted 18/03/17 09:04 AM Share Posted 18/03/17 09:04 AM 37 minutes ago, arronm said: Seen a 6R80 input shaft in the flesh today. Why would you bother with anything else. Nizpro can keep their shafts. Gold by the Kg is probably cheaper............. did ya get shafted mate? 1 Link to comment Share on other sites More sharing options...
arronm Dropping a turd Gold Donating Members 9,520 Member For: 17y 1m 27d Gender: Male Location: Perth Posted 18/03/17 09:05 AM Share Posted 18/03/17 09:05 AM Na dude. I run manual..... Link to comment Share on other sites More sharing options...
JETURBO ...JD TUNING ADELAIDE... Gold Donating Members 23,708 Member For: 16y 6m 23d Gender: Male Location: Adelaide Posted 18/03/17 09:30 AM Share Posted 18/03/17 09:30 AM 25 minutes ago, arronm said: Na dude. I run manual.....that can't do 250kmh across the K 1 Link to comment Share on other sites More sharing options...
bamk2f6tornado Bronze Donating Members 777 Member For: 11y 21d Gender: Male Location: Rockhampton Qld Posted 18/03/17 09:32 AM Share Posted 18/03/17 09:32 AM ^ 2 Link to comment Share on other sites More sharing options...
woz84 Member 33 Member For: 11y 1m 27d Gender: Male Posted 11/05/18 01:00 PM Share Posted 11/05/18 01:00 PM (edited) Hi all hopefully somebody can help. I have an 09 g6et and over the last couple days swapped transmissions with another g6et from 08. Basically, 1 car works and the other doesn't. At first I didn't swap TCM/mechatronics because I drove 1 car for about a week with no issues. Today I got around to getting the 2nd car back on the road and it just comes up with transmission fault with no gears at all so I figured I needed to install the original TCM. I got dirty and swapped the 2 mechatronics around. The first car works as usual, but the 2nd car still has the transmission fault? I did some continuity tests from the plug on the trans to the ECU and the wires all seem fine so I'm not sure what else I can do? My obd reader tells me there's a p0701 fault, TCM out of range. Any help appreciated. Edited 11/05/18 01:09 PM by woz84 Link to comment Share on other sites More sharing options...
Puffwagon Puff Gold Donating Members 15,984 Member For: 9y 10m 24d Gender: Male Location: South Australia Posted 11/05/18 01:56 PM Share Posted 11/05/18 01:56 PM (edited) Have a read of this. Edit: The error code is in part 4.2.5. Extra edit: The ford manual reckons your tcm is probably rooted. I can post some of that info if you don't already have it. Edited 11/05/18 02:05 PM by Puffwagon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now