Dillz Three pedals are better then two.. Donating Members 15,637 Member For: 17y 8m 29d Gender: Male Location: Melbourne Posted 22/12/11 06:06 AM Share Posted 22/12/11 06:06 AM custom tune $700-1000turbo back exhaust $1500+$500 fitting?60lbs injectors $350 ($100 install)cold air intake $170 (assuming it's just K&N & F6 snorkel)valve springs $900XCAL $700Total $5220That's being overly generous you could get it done cheaper if you shop around/do it yourself.If it was me I'd swap the full exhaust for a full cooler kit and just run a high flow cat (around the same price), source all the gear myself then find a good tuner to put it in and tune it. Link to comment Share on other sites More sharing options...
gsd112 Donating Members 604 Member For: 14y 5m 19d Gender: Male Location: Penrith Posted 22/12/11 06:32 AM Share Posted 22/12/11 06:32 AM (edited) Mate go see Joe @ Cresent Motorsport or Spiro @ Autotech. I spent $3500 and got 270rwkw . I wasn't chasing anymore as I want to preserve the BA bottom end and the 4 speed auto. With your budget you should see 300. Edited 22/12/11 06:36 AM by gsd112 Link to comment Share on other sites More sharing options...
Kosij Donating Members 2,045 Member For: 13y 6m 13d Gender: Male Posted 22/12/11 06:46 AM Share Posted 22/12/11 06:46 AM Hey mate,I have a 2005 ba I got a second hand AVO cooler $700Xcal 3 $500Full exhaust x-force $500Injectors 60lbs $350 Atomic valve springs $420Tuned at Autotech engineering Granville for$1760 with the springs installed!I got 306RWKW So your budget is good just look around get pieces here and there then go forYour tune u won't look back Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 11m 4d Gender: Male Location: Vic Posted 22/12/11 07:01 AM Share Posted 22/12/11 07:01 AM IMO cooler & cat over full exhaust. Doing a full exhaust could lead to boost control issues... Then you'll need an actuator etc. Doing a cooler will equal more consistent power and a Hi flow cat will help make the power. Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 14y 1m 6d Gender: Male Location: Auckland, New Zealand Posted 22/12/11 09:20 AM Share Posted 22/12/11 09:20 AM That's a good place to start but beware the overboost. You may need about a 10lb actuator and ported wastegate to keep the boost stable anyway.When you say you don't want to run the car into the ground does that include the auto? I'm not sure what power they are good for in the BA...Why 60lb injectors? I would have thought 42lbs would be more suitable for 300rwkw... Link to comment Share on other sites More sharing options...
UBA Donating Members 212 Member For: 13y 2m 2d Gender: Male Posted 22/12/11 10:05 AM Author Share Posted 22/12/11 10:05 AM ok im learning alot here...I think taking my time is gunna save me some cash.new plan, im gunna source the parts myself (help will be needed with part names etc)a parts list would help if anybody knows where I can find one ???and then find a good tuner to do the install and dynohopefully this will save me some cash.again all help is welcome.....RegardsUBA Link to comment Share on other sites More sharing options...
Henz Tampon inserted, Auto Acquired, next purchase a new handbag Donating Members 9,946 Member For: 16y 11m 4d Gender: Male Location: Vic Posted 22/12/11 10:19 AM Share Posted 22/12/11 10:19 AM Start with a plazmaman or process west stage 1 style cooler, a F6 intake an KnN will be good too. For fuel, a walbro intake and any set of injectors, 42s are fine. They have better idle quality than 60s but it's hard to pick. A hi flow cat will help flow which means easier power. All you'll need for 300 is 12-13psi, so the stock actuator should be fine. Link to comment Share on other sites More sharing options...
MurdoK Donating Members 719 Member For: 14y 8m 3d Gender: Male Location: Perth,WA Posted 22/12/11 10:40 AM Share Posted 22/12/11 10:40 AM All good advice given how ever id personally speak to your tuner about injectors and buy what he is comfortable working with. Link to comment Share on other sites More sharing options...
nitro xr6 turbo Banned 185 Member For: 13y 3m 10d Gender: Male Location: perth wa Posted 22/12/11 01:01 PM Share Posted 22/12/11 01:01 PM with 70000kms on the clock I would also look at a auto trans flush and service. the 4 speed autos have been knowen to fail at stock power or take 400rwkw for 100000kms, it just depends if it was built on a friday or not. anyway a service would give you the best chance on making it last.cheers,andy Link to comment Share on other sites More sharing options...
UBA Donating Members 212 Member For: 13y 2m 2d Gender: Male Posted 22/12/11 10:15 PM Author Share Posted 22/12/11 10:15 PM can anybody point me in the right direction regarding parts as I have no idea what im doingbefore purchase I will confirm they are the right parts for the car on this forum and price.good idea??this will be left until the chrissy peroid is done.merry Xmas to all Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now