dule Donating Members 1,180 Member For: 17y 10m 1d Gender: Male Location: Sydney Posted 01/12/11 04:22 AM Share Posted 01/12/11 04:22 AM It's probably labour cost, I was replacing my turbo bolts couple of month ago and it's a bitch... Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 14y 30d Gender: Male Location: Auckland, New Zealand Posted 01/12/11 08:52 AM Share Posted 01/12/11 08:52 AM I replaced my studs with bolts. Was thinking about maybe drilling and wiring the heads. Link to comment Share on other sites More sharing options...
SuckSqueezeBangBlow ʎǝʞuoɯ ɹoıuǝs Donating Members 1,808 Member For: 16y 2m 1d Gender: Male Posted 01/12/11 09:06 AM Share Posted 01/12/11 09:06 AM ...and even just tightening that front bottom one is a bastard. I could get a uni-joint on there last time but struggled yesterday. do some people use a half moon 14mm ring spanner on it? Link to comment Share on other sites More sharing options...
1600dave Donating Members 872 Member For: 14y 1m 7d Posted 01/12/11 09:12 AM Share Posted 01/12/11 09:12 AM Just to confirm, the turbo studs are 10x1.5mm on both ends? Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 14y 30d Gender: Male Location: Auckland, New Zealand Posted 06/12/11 06:27 AM Share Posted 06/12/11 06:27 AM I cut down some spare exhaust manifold bolts from another engine from memory... Link to comment Share on other sites More sharing options...
possum Donating Members 553 Member For: 15y 8m 25d Gender: Male Posted 06/12/11 10:18 AM Share Posted 06/12/11 10:18 AM Nizpro fit inconnel studs and glenlock nuts along with a genuine nissan turbo gasket.generally done during another turbo off job e.g: engine mount too save labour costs Link to comment Share on other sites More sharing options...
SipposBFT Member 81 Member For: 15y 5m 27d Posted 08/12/11 11:24 AM Share Posted 08/12/11 11:24 AM (edited) a quick fix I performed was using exhaust manifold washers from an RB30 (VL or R31 skyline 3L)...theyre spherical & act like spring washers...I repaired my leak about 10,000k ago & still tight. I have a quite a few spare If anyone wants some. Edited 08/12/11 11:24 AM by SipposBFT Link to comment Share on other sites More sharing options...
riptide Member 733 Member For: 14y 30d Gender: Male Location: Auckland, New Zealand Posted 09/12/11 06:06 AM Share Posted 09/12/11 06:06 AM You have any pics? Link to comment Share on other sites More sharing options...
09sr5 Member 56 Member For: 14y 4m 27d Posted 10/12/11 04:07 AM Share Posted 10/12/11 04:07 AM Just to confirm, the turbo studs are 10x1.5mm on both ends?No the turbo end has a fine thread. Lock tight won't do anything, remember what we do to things that we need to undo that have lock tight bolts... We hit it with an oxy. I've seen my turbo and manifold glowi g before... I put new studs with a spring washers. Will see his this goes Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 17y 6d Gender: Male Location: Sydney Posted 10/12/11 04:56 AM Share Posted 10/12/11 04:56 AM Just use the stage 8's and forget about it ever happening again."Dyno figures make for good conversation, mph at the strip proves it without reservation" Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now