Dale@CHE Member 52 Member For: 16y 1m 5d Posted 06/05/12 02:31 AM Share Posted 06/05/12 02:31 AM (edited) here you go , I did get to 450rwkw on this car before it stopped due to running out of injector..http://www.castlehillexhaust.com.au/files/ute.jpg Edited 06/05/12 02:31 AM by Dale@CHE Link to comment Share on other sites More sharing options...
Dale@CHE Member 52 Member For: 16y 1m 5d Posted 06/05/12 02:34 AM Share Posted 06/05/12 02:34 AM whats your experience tell you a set of 75lb injectors with a single 044 surgey fed from a walbro on a 35/40 capable of?a single 044 flows 4.4L per minute of fuel at 40psi75lb injectors flow 4.5L per minute, so your pump will be out before your injectors.mid to high 300rwkw would be around the range for that one Link to comment Share on other sites More sharing options...
Paulie2256 Donating Members 7,441 Member For: 16y 19d Gender: Male Location: SE Melbourne Posted 06/05/12 02:50 AM Share Posted 06/05/12 02:50 AM What's going on at 4k? Link to comment Share on other sites More sharing options...
CHLAXN Donating Members 932 Member For: 16y 6m 19d Gender: Male Location: north QLD Posted 06/05/12 03:03 AM Share Posted 06/05/12 03:03 AM (edited) Ok guys..Had the ute up on the hoist on Saturday...was having a look at the hoses coming off the Surgetank and found what I believe, E85 was doing to my hose. Am now sourcing a E85 compatible set now.Just a heads up for everyone else that's all.That's why I spent extra money and went with speedflow Teflon braided hose and fittings instead of the rubber hose that come with the kit. Lucky to pick that up mate before it was too late. Edited 06/05/12 03:05 AM by CHLAXN 1 Link to comment Share on other sites More sharing options...
RynoF6 Idiot Member Donating Members 446 Member For: 14y 10m 20d Gender: Male Location: Muswellbrook, NSW Posted 06/05/12 03:04 AM Share Posted 06/05/12 03:04 AM (edited) No way can one 044 do over 400rwkw e85 on 12v. That single 044 must be running way higher voltage. Edited 06/05/12 03:06 AM by RynoF6 Link to comment Share on other sites More sharing options...
XYZ Donating Members 1,171 Member For: 15y 2m 24d Posted 06/05/12 03:07 AM Share Posted 06/05/12 03:07 AM What's going on at 4k?Looks like wheel spin Link to comment Share on other sites More sharing options...
possum Donating Members 553 Member For: 15y 6m 18d Gender: Male Posted 06/05/12 03:59 AM Share Posted 06/05/12 03:59 AM (edited) . Edited 06/05/12 04:01 AM by possum Link to comment Share on other sites More sharing options...
Vevapower Waiting for the 1st N/A 12! Donating Members 2,533 Member For: 16y 10m Gender: Male Location: Sydney Posted 06/05/12 04:45 AM Share Posted 06/05/12 04:45 AM Dale I'll give you a buzz tomorrow to work out the best time to swing by. Also Riki made 600.4 rwkws on 80 lbs injectors albeit the reg had to be wound up deluxe! Link to comment Share on other sites More sharing options...
Dale@CHE Member 52 Member For: 16y 1m 5d Posted 06/05/12 04:58 AM Share Posted 06/05/12 04:58 AM Dale I'll give you a buzz tomorrow to work out the best time to swing by. Also Riki made 600.4 rwkws on 80 lbs injectors albeit the reg had to be wound up deluxe!Yep I'll be in about 10am, 96802777, Winding fuel pressure has other problems like your 044s flow a lot less on 80-100psi like up to 50% less.. It's all about putting the right parts in the car to do the job right with out stressing any thing, much better off putting 160lb injectors in and running 40psi pressure than having 100lb injectors and 100psi pressure, you cannot tell the difference in the way the cars drive when tuned correctly, the injectors cost the same so no reason not to do it correctly the first time Link to comment Share on other sites More sharing options...
Dale@CHE Member 52 Member For: 16y 1m 5d Posted 06/05/12 05:03 AM Share Posted 06/05/12 05:03 AM What's going on at 4k?Wheel spin, change the bottom axis to road speed and it's not there but no point having equipment that can give 100% accurate rpm and not use it! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now