Jump to content

Zf 6 Speed Tune


Sydneyxr6t

Recommended Posts

  • I see a red door and I want to paint it black
  • Donating Members
  • Member For: 15y 1m 3d
  • Gender: Male
  • Location: Far north queensland

sometimes on the bf's they leaked from the sump, with the sealing arangement they had is was only about 8nm for the srews holding the sump on. Bomb it with degreaser and have a squiz. Changed the sump on mine with QIK1 and never leaked from there again, did the screws up to about 12-15 from memory

Link to comment
Share on other sites

  • loitering with intent
  • Lifetime Members
  • Member For: 21y 3m 10d
  • Gender: Male
  • Location: Zombie Birdhouse

just about to head off there now, brace thee self later.

I think one of Ozzies original solo pieces said it best.

Diary of a Madman bwahhhahah

Link to comment
Share on other sites

  • Donating Members
  • Member For: 17y 8m 23d
  • Gender: Male
  • Location: Gladstone, Queensland

Every bf I ever worked on takes off in second gear from a stand standstill unless you manually select first gear or you give it absolute sh*t with the throttle, my bf still does it also. Fgs may be different but I think what you may be feeling is the torque converter unlocking.

Link to comment
Share on other sites

  • Idiot Member
  • Donating Members
  • Member For: 14y 10m 8d
  • Gender: Male
  • Location: Muswellbrook, NSW

I think the trans learns from the driver. Depending on how driven mine either takes off in first or second.

My wife drives it a lot, slowly and in D. If I hop in after she has been using it for a few days it takes off in second.

When I drive it a lot, hard and 50% in manual mode. It takes off in first and has the jerk change down (2-1 at 4kph) when stopping at lights.

Link to comment
Share on other sites

  • Here since the start...
  • Lifetime Members
  • Member For: 21y 7m 3d
  • Gender: Male
  • Location: Victoria

ZF takes off in 2nd.

Drive down the road in manual and come to a stop. You'll see the gear indicator go down to 2 when you stop.

Or while you're stopped select performance mode. Start to drive off and manually downshift. The trams will downshift a gear into first. You took off in 2nd again.

Link to comment
Share on other sites

  • Idiot Member
  • Donating Members
  • Member For: 14y 10m 8d
  • Gender: Male
  • Location: Muswellbrook, NSW

In performance mode mine always stops in second and stays there. But after driving vigorously for a few days it takes off in 1st in D. You can tell because of the jerk when it changes 2-1 whilst decelerating. The same jerk people complain of. This is for an fg

Edited by RynoF6
Link to comment
Share on other sites

  • Carnage on the Garage Floor
  • Donating Members
  • Member For: 14y 6m 18d
  • Gender: Male
  • Location: Gold Coast

Unless 2nd - 3rd shift happens at about 20klm, I can assure that post tune, my auto always goes back into first from stop. This is in D, or performance mode. The only time is doesn't is if the car is still moving slowly.

*edit* Just took the car for a test run. In 'D' it shifts 1-2 at 20klm. In performance mode about 23klm. This was done with light throttle on the flat. Coming back I slowed at a roundabout to around 10klm then light pedal coming out and it stayed in 2nd.

Edited by Bomber
Link to comment
Share on other sites

  • Donating Members
  • Member For: 14y 5m 8d
  • Gender: Male
  • Location: Perth,WA

ZF takes off in 2nd.

Drive down the road in manual and come to a stop. You'll see the gear indicator go down to 2 when you stop.

Or while you're stopped select performance mode. Start to drive off and manually downshift. The trams will downshift a gear into first. You took off in 2nd again.

that's my experience too... but Im without tune.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
  • Create New...
'